Hi, 
   I understand there is a registry key change for Windows 2000 Veritas
Netbackup Datacenter edition (4.5) that enables you to display 7 days of
activity monitor data rather than the default 3 days. Could someone please
let me know if they have the answer?

Best Regards

Paul

-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu]On Behalf Of Ellwood, MW
(Mike) 
Sent: 13 January 2004 12:22
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] Command to interrogate UP/DOWN status of robot?


We are running with a Sun Storedge L20 robot with HP Ultrium1 LTO drives.

Occasionally we will have a problem with the robotics requiring manual
intervention,
typically requiring us to run an online test ("calibrate library") which
usually sorts things
out.

I can see from /var/adm/messages that the robot has gone into a DOWN state,
and
then when the test has run, it goes back into the UP state.

However, the log is only providing history, and I'd like to be able to
interrogate its status
(from a script) in real time.

I was wondering if there was a command around, similar to vmoprcmd (which
reports
on the drive status), which might tell me?

With thanks,

Mike Ellwood

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu