[Veritas-bu] Netbackup sg driver and Solaris
2003-10-23 13:03:22
Look at this technote from Veritas:
http://seer.support.veritas.com/docs/236104.htm
It tells you exactly how to build your sg devices. Everything is based on
the sg.conf and sg.links files. You need to rebuild all your devices if you
add/remove a tape drive.
-----Original Message-----
From: John Vernier Simon [mailto:mxemu AT xemu DOT org]
Sent: Wednesday, October 22, 2003 22:19
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] Netbackup sg driver and Solaris
1. Under what circumstances do you have to regenerate the sg driver
(sg.conf/sg.links etc)
2. Where does the sg get its information when it scans for LUNS (i.e
does it look in /dev/rmt)
3. If you add tape drives, do you need to rerun the configuration, or
do you put max LUNS to a larger #.
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|