Box = e450, Solaris 8
HBA's = 2 x JNI 6460 , Driver 5.3 connected to a brocade fabric.
ATL = STK L700 w/ 8 IBM LTO Gen 2 Drives connected to a brocade fabric.

Right now I'm just trying to see the physical tape drives.

my logs show that I'm, seeing the devices, 2 drives on each HBA

jnic146x0: Port 020055 (WWN 5005076300213C6B:5005076300613C6B) online
jnic146x0: Port 020155 (WWN 5005076300213A72:5005076300613A72) online
Network Port FFFC01 (WWN 1000006069102F0A:20FD006069102F0A) available

jnic146x1: Port 020255 (WWN 5005076300213B4C:5005076300613B4C) online
jnic146x1: Port 020355 (WWN 5005076300213800:5005076300613800) online
Network Port FFFC02 (WWN 1000006069102F6A:20FD006069102F6A) available

I'm using the latest st driver.

# strings /kernel/drv/st | grep IBM
IBM     ULTRIUM-TD2
IBM     ULT3580-TD2
IBM     ULTRIUM-TD1
IBM     ULT3580-TD1
IBM Ultrium Gen 2 LTO
IBM Ultrium Gen 2 LTO
IBM Ultrium LTO
IBM Ultrium LTO

However, no new devices are being created in /dev/rmt via boot -r or
devfsadm

Any ideas ?