[Veritas-bu] Client multiple IP addresses?
2003-09-26 02:38:56
Make sure that in /etc/hosts on your master the client's name points to
it's permanent ip adress and check to see if /etc/nsswitch.conf has the
following entry:
hosts: files dns
Good luck.
Marco.
On Thu, 2003-09-25 at 19:50, Wayne T Smith wrote:
> My (Solaris V4.5MP5) Netbackup has trouble with a client (Win2000) that
> has 1 IP name (xxx.maine.edu) and 2 IP addresses (130.111.xxx.yyy and
> 130.111.aaa.bbb). This client doesn't have dual network attachments,
> but moves between areas using one of the IP addresses, then the other.
>
> Netbackup times out.
>
> The (Solaris, I guess) PING command results differ depending on the case
> of the IP name entered! (PING from other systems doesn't).
>
> If Netbackup chooses the IP address where the client machine resides,
> things should work (but haven't). If Netbackup chooses the "wrong" IP
> address, it must timeout ... but since things (such as client properties
> on the client from the backup server GUI) stop there, I guess Netbackup
> fails for this client setup. :-( Anyone know of an approach to this
> problem?
>
> (The problem comes from the client having a permanent IP address at its
> home base, but getting assigned another as it roams about the campus).
>
> Thanks in advance for any suggestions, wayne
>
> _______________________________________________
> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|