This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_001_01C31968.4DFF5C60
Content-Type: text/plain;
charset="iso-8859-1"
Paul thanks for your help, I found that an LP8000-EMC hba card has a light
out and lputil doesn't even see it.
-----Original Message-----
From: Paul Winkeler [mailto:pwinkeler AT pbnj-solutions DOT com]
Sent: Tuesday, May 13, 2003 11:19 AM
To: 'Markham, Richard'
Subject: RE: [Veritas-bu] sgscan problem
Hmm nothing unusual there; when you do an "ls /dev/sg/c*t*" do you see the
c3 entries? If not, you may need to build them with the sg.build script.
www.pbnj-solutions.com IT Solutions That Stick
(216) 533-5708
-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of Markham,
Richard
Sent: Tuesday, May 13, 2003 11:07 AM
To: 'veritas-bu AT mailman.eng.auburn DOT edu'
Subject: RE: [Veritas-bu] sgscan problem
# Configuration file for SCSA Generic.
#
name="sg" class="scsi" target=0 lun=0;
name="sg" class="scsi" target=0 lun=1;
name="sg" class="scsi" target=1 lun=0;
name="sg" class="scsi" target=1 lun=1;
name="sg" class="scsi" target=2 lun=0;
name="sg" class="scsi" target=2 lun=1;
name="sg" class="scsi" target=3 lun=0;
name="sg" class="scsi" target=3 lun=1;
name="sg" class="scsi" target=4 lun=0;
name="sg" class="scsi" target=4 lun=1;
name="sg" class="scsi" target=5 lun=0;
name="sg" class="scsi" target=5 lun=1;
name="sg" class="scsi" target=6 lun=0;
name="sg" class="scsi" target=6 lun=1;
-----Original Message-----
From: Paul Winkeler [mailto:pwinkeler AT pbnj-solutions DOT com]
Sent: Tuesday, May 13, 2003 11:05 AM
To: 'Markham, Richard'
Subject: RE: [Veritas-bu] sgscan problem
Richard
What's your sg.conf look like?
www.pbnj-solutions.com IT Solutions That Stick
(216) 533-5708
-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of Markham,
Richard
Sent: Tuesday, May 13, 2003 10:16 AM
To: 'veritas-bu AT mailman.eng.auburn DOT edu'
Subject: [Veritas-bu] sgscan problem
I'm running Solaris 8 and setting up a new media manager. sgscan is giving
the following:
#sgscan
/dev/sg/c0t0l0: Disk (/dev/rdsk/c0t0d0): "SEAGATE ST336605LSUN36G"
/dev/sg/c0t1l0: Disk (/dev/rdsk/c0t1d0): "SEAGATE ST336605LSUN36G"
/dev/sg/c0t6l0: Cdrom: "TOSHIBA DVD-ROM SD-M1401"
/dev/sg/c2t0l0: Disk (???): "DGC RAID 5"
/dev/sg/c2t0l1: Disk (???): "DGC"
/dev/sg/c2t1l0: Changer: "STK L40"
/dev/sg/c2t1l1: Tape (/dev/rmt/0): "QUANTUM DLT8000"
/dev/sg/c3t0l0: Error opening /dev/sg/c3t0l0, No such device or address
/dev/sg/c3t0l1: Error opening /dev/sg/c3t0l1, No such device or address
/dev/sg/c3t1l0: Error opening /dev/sg/c3t1l0, No such device or address
/dev/sg/c3t1l1: Error opening /dev/sg/c3t1l1, No such device or address
/dev/sg/c3t2l0: Error opening /dev/sg/c3t2l0, No such device or address
/dev/sg/c3t2l1: Error opening /dev/sg/c3t2l1, No such device or address
/dev/sg/c3t3l0: Error opening /dev/sg/c3t3l0, No such device or address
/dev/sg/c3t3l1: Error opening /dev/sg/c3t3l1, No such device or address
/dev/sg/c3t4l0: Error opening /dev/sg/c3t4l0, No such device or address
/dev/sg/c3t4l1: Error opening /dev/sg/c3t4l1, No such device or address
/dev/sg/c3t5l0: Error opening /dev/sg/c3t5l0, No such device or address
/dev/sg/c3t5l1: Error opening /dev/sg/c3t5l1, No such device or address
/dev/sg/c3t6l0: Error opening /dev/sg/c3t6l0, No such device or address
/dev/sg/c3t6l1: Error opening /dev/sg/c3t6l1, No such device or address
normally the server would have printed another line indicating the second
tape drive:
/dev/sg/cXtXlX: Tape (/dev/rmt/1): "QUANTUM DLT8000" instead of all the
'Error's
I have 7 other mediamanagers in this SSO environment to compare to but
haven't seen
the problem yet.
my st.conf has the following (veritas related) entries:
tape-config-list=
"QUANTUM DLT8000", "Quantum DLT8000 Tape Drive", "DLT8k-data";
DLT8k-tape = 1,0x38,0,0x1d639,4,0x1a,0x1b,0x41,0x41,3;
# This line adds support for Fibre Channel Tapes
name="st" parent="fp" target=0;
name="st" class="scsi" target=0 lun=0;
name="st" class="scsi" target=0 lun=1;
name="st" class="scsi" target=1 lun=0;
name="st" class="scsi" target=1 lun=1;
name="st" class="scsi" target=2 lun=0;
name="st" class="scsi" target=2 lun=1;
name="st" class="scsi" target=3 lun=0;
name="st" class="scsi" target=3 lun=1;
name="st" class="scsi" target=4 lun=0;
name="st" class="scsi" target=4 lun=1;
name="st" class="scsi" target=5 lun=0;
name="st" class="scsi" target=5 lun=1;
name="st" class="scsi" target=6 lun=0;
name="st" class="scsi" target=6 lun=1;
So basically if anyone has a hint where I can look would be great.
------_=_NextPart_001_01C31968.4DFF5C60
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2653.12">
<TITLE>FW: [Veritas-bu] sgscan problem</TITLE>
</HEAD>
<BODY>
<P><FONT SIZE=3D2>Paul thanks for your help, I found that an LP8000-EMC =
hba card has a light out and lputil doesn't even see it.</FONT>
</P>
<P><FONT SIZE=3D2>-----Original Message-----</FONT>
<BR><FONT SIZE=3D2>From: Paul Winkeler [<A =
HREF=3D"mailto:pwinkeler AT pbnj-solutions DOT com">mailto:pwinkeler@pbnj-solut=
ions.com</A>]</FONT>
<BR><FONT SIZE=3D2>Sent: Tuesday, May 13, 2003 11:19 AM</FONT>
<BR><FONT SIZE=3D2>To: 'Markham, Richard'</FONT>
<BR><FONT SIZE=3D2>Subject: RE: [Veritas-bu] sgscan problem</FONT>
</P>
<BR>
<P><FONT SIZE=3D2>Hmm nothing unusual there; when you do an "ls =
/dev/sg/c*t*" do you see the c3 entries? If not, you may =
need to build them with the sg.build script.</FONT></P>
<BR>
<P><FONT SIZE=3D2>www.pbnj-solutions.com IT Solutions That Stick</FONT>
<BR><FONT SIZE=3D2>(216) 533-5708</FONT>
<BR><FONT SIZE=3D2>-----Original Message-----</FONT>
<BR><FONT SIZE=3D2>From: veritas-bu-admin AT mailman.eng.auburn DOT edu [<A =
HREF=3D"mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu">mailto:veritas-b=
u-admin AT mailman.eng.auburn DOT edu</A>] On Behalf Of Markham, =
Richard</FONT></P>
<P><FONT SIZE=3D2>Sent: Tuesday, May 13, 2003 11:07 AM</FONT>
<BR><FONT SIZE=3D2>To: 'veritas-bu AT mailman.eng.auburn DOT edu'</FONT>
<BR><FONT SIZE=3D2>Subject: RE: [Veritas-bu] sgscan problem</FONT>
</P>
<BR>
<P><FONT SIZE=3D2># Configuration file for SCSA Generic.</FONT>
<BR><FONT SIZE=3D2>#</FONT>
<BR><FONT SIZE=3D2>name=3D"sg" class=3D"scsi" =
target=3D0 lun=3D0;</FONT>
<BR><FONT SIZE=3D2>name=3D"sg" class=3D"scsi" =
target=3D0 lun=3D1;</FONT>
<BR><FONT SIZE=3D2>name=3D"sg" class=3D"scsi" =
target=3D1 lun=3D0;</FONT>
<BR><FONT SIZE=3D2>name=3D"sg" class=3D"scsi" =
target=3D1 lun=3D1;</FONT>
<BR><FONT SIZE=3D2>name=3D"sg" class=3D"scsi" =
target=3D2 lun=3D0;</FONT>
<BR><FONT SIZE=3D2>name=3D"sg" class=3D"scsi" =
target=3D2 lun=3D1;</FONT>
<BR><FONT SIZE=3D2>name=3D"sg" class=3D"scsi" =
target=3D3 lun=3D0;</FONT>
<BR><FONT SIZE=3D2>name=3D"sg" class=3D"scsi" =
target=3D3 lun=3D1;</FONT>
<BR><FONT SIZE=3D2>name=3D"sg" class=3D"scsi" =
target=3D4 lun=3D0;</FONT>
<BR><FONT SIZE=3D2>name=3D"sg" class=3D"scsi" =
target=3D4 lun=3D1;</FONT>
<BR><FONT SIZE=3D2>name=3D"sg" class=3D"scsi" =
target=3D5 lun=3D0;</FONT>
<BR><FONT SIZE=3D2>name=3D"sg" class=3D"scsi" =
target=3D5 lun=3D1;</FONT>
<BR><FONT SIZE=3D2>name=3D"sg" class=3D"scsi" =
target=3D6 lun=3D0;</FONT>
<BR><FONT SIZE=3D2>name=3D"sg" class=3D"scsi" =
target=3D6 lun=3D1;</FONT>
</P>
<P><FONT SIZE=3D2>-----Original Message-----</FONT>
<BR><FONT SIZE=3D2>From: Paul Winkeler [<A =
HREF=3D"mailto:pwinkeler AT pbnj-solutions DOT com">mailto:pwinkeler@pbnj-solut=
ions.com</A>]</FONT>
<BR><FONT SIZE=3D2>Sent: Tuesday, May 13, 2003 11:05 AM</FONT>
<BR><FONT SIZE=3D2>To: 'Markham, Richard'</FONT>
<BR><FONT SIZE=3D2>Subject: RE: [Veritas-bu] sgscan problem</FONT>
</P>
<BR>
<P><FONT SIZE=3D2>Richard</FONT>
</P>
<P><FONT SIZE=3D2>What's your sg.conf look like?</FONT>
</P>
<BR>
<P><FONT SIZE=3D2>www.pbnj-solutions.com IT Solutions That Stick</FONT>
<BR><FONT SIZE=3D2>(216) 533-5708</FONT>
<BR><FONT SIZE=3D2>-----Original Message-----</FONT>
<BR><FONT SIZE=3D2>From: veritas-bu-admin AT mailman.eng.auburn DOT edu [<A =
HREF=3D"mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu">mailto:veritas-b=
u-admin AT mailman.eng.auburn DOT edu</A>] On Behalf Of Markham, =
Richard</FONT></P>
<P><FONT SIZE=3D2>Sent: Tuesday, May 13, 2003 10:16 AM</FONT>
<BR><FONT SIZE=3D2>To: 'veritas-bu AT mailman.eng.auburn DOT edu'</FONT>
<BR><FONT SIZE=3D2>Subject: [Veritas-bu] sgscan problem</FONT>
</P>
<BR>
<P><FONT SIZE=3D2>I'm running Solaris 8 and setting up a new media =
manager. sgscan is giving the following: </FONT>
<BR><FONT SIZE=3D2>#sgscan </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c0t0l0: Disk (/dev/rdsk/c0t0d0): =
"SEAGATE ST336605LSUN36G" </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c0t1l0: Disk (/dev/rdsk/c0t1d0): =
"SEAGATE ST336605LSUN36G" </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c0t6l0: Cdrom: "TOSHIBA DVD-ROM =
SD-M1401" </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c2t0l0: Disk (???): =
"DGC RAID 5" </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c2t0l1: Disk (???): "DGC" </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c2t1l0: Changer: =
"STK L40" </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c2t1l1: Tape (/dev/rmt/0): "QUANTUM =
DLT8000" </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c3t0l0: Error opening /dev/sg/c3t0l0, No =
such device or address </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c3t0l1: Error opening /dev/sg/c3t0l1, No =
such device or address </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c3t1l0: Error opening /dev/sg/c3t1l0, No =
such device or address </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c3t1l1: Error opening /dev/sg/c3t1l1, No =
such device or address </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c3t2l0: Error opening /dev/sg/c3t2l0, No =
such device or address </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c3t2l1: Error opening /dev/sg/c3t2l1, No =
such device or address </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c3t3l0: Error opening /dev/sg/c3t3l0, No =
such device or address </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c3t3l1: Error opening /dev/sg/c3t3l1, No =
such device or address </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c3t4l0: Error opening /dev/sg/c3t4l0, No =
such device or address </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c3t4l1: Error opening /dev/sg/c3t4l1, No =
such device or address </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c3t5l0: Error opening /dev/sg/c3t5l0, No =
such device or address </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c3t5l1: Error opening /dev/sg/c3t5l1, No =
such device or address </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c3t6l0: Error opening /dev/sg/c3t6l0, No =
such device or address </FONT>
<BR><FONT SIZE=3D2>/dev/sg/c3t6l1: Error opening /dev/sg/c3t6l1, No =
such device or address </FONT>
<BR><FONT SIZE=3D2>normally the server would have printed another line =
indicating the second tape drive: </FONT>
<BR><FONT SIZE=3D2>/dev/sg/cXtXlX: Tape (/dev/rmt/1): "QUANTUM =
DLT8000" instead of all the 'Error's </FONT>
<BR><FONT SIZE=3D2>I have 7 other mediamanagers in this SSO environment =
to compare to but haven't seen </FONT>
<BR><FONT SIZE=3D2>the problem yet. </FONT>
<BR><FONT SIZE=3D2>my st.conf has the following (veritas related) =
entries: </FONT>
<BR><FONT SIZE=3D2>tape-config-list=3D </FONT>
<BR><FONT SIZE=3D2> =
"QUANTUM DLT8000", "Quantum DLT8000 Tape Drive", =
"DLT8k-data"; </FONT>
<BR><FONT SIZE=3D2>DLT8k-tape =3D =
1,0x38,0,0x1d639,4,0x1a,0x1b,0x41,0x41,3; </FONT>
<BR><FONT SIZE=3D2># This line adds support for Fibre Channel Tapes =
</FONT>
<BR><FONT SIZE=3D2>name=3D"st" parent=3D"fp" =
target=3D0; </FONT>
<BR><FONT SIZE=3D2>name=3D"st" class=3D"scsi" =
target=3D0 lun=3D0; </FONT>
<BR><FONT SIZE=3D2>name=3D"st" class=3D"scsi" =
target=3D0 lun=3D1; </FONT>
<BR><FONT SIZE=3D2>name=3D"st" class=3D"scsi" =
target=3D1 lun=3D0; </FONT>
<BR><FONT SIZE=3D2>name=3D"st" class=3D"scsi" =
target=3D1 lun=3D1; </FONT>
<BR><FONT SIZE=3D2>name=3D"st" class=3D"scsi" =
target=3D2 lun=3D0; </FONT>
<BR><FONT SIZE=3D2>name=3D"st" class=3D"scsi" =
target=3D2 lun=3D1; </FONT>
<BR><FONT SIZE=3D2>name=3D"st" class=3D"scsi" =
target=3D3 lun=3D0; </FONT>
<BR><FONT SIZE=3D2>name=3D"st" class=3D"scsi" =
target=3D3 lun=3D1; </FONT>
<BR><FONT SIZE=3D2>name=3D"st" class=3D"scsi" =
target=3D4 lun=3D0; </FONT>
<BR><FONT SIZE=3D2>name=3D"st" class=3D"scsi" =
target=3D4 lun=3D1; </FONT>
<BR><FONT SIZE=3D2>name=3D"st" class=3D"scsi" =
target=3D5 lun=3D0; </FONT>
<BR><FONT SIZE=3D2>name=3D"st" class=3D"scsi" =
target=3D5 lun=3D1; </FONT>
<BR><FONT SIZE=3D2>name=3D"st" class=3D"scsi" =
target=3D6 lun=3D0; </FONT>
<BR><FONT SIZE=3D2>name=3D"st" class=3D"scsi" =
target=3D6 lun=3D1; </FONT>
<BR><FONT SIZE=3D2>So basically if anyone has a hint where I can look =
would be great. </FONT>
</P>
</BODY>
</HTML>
------_=_NextPart_001_01C31968.4DFF5C60--
|
