If you are thinking about the "EMC Option" it is effectively EMC Timefinder
bundled via Veritas for snap-image backups, IDBL.
Matthew Moody
MCSI
-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu]On Behalf Of
Dave.Zarnoch AT sungard DOT com
Sent: Wednesday, April 30, 2003 1:24 PM
To: Mark.Donaldson AT experianems DOT com
Cc: veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] HOW TO EMC and SAN? (version)
Mark,
That's what I thought...
Thanks!
I was a little confused when I was told about some sort of product
that is an interface between EMC and NetBackup???
I thought that maybe this product was a requirement?
Thanks!
Dave Zarnoch
SunGard Resources Group
SunGard eSourcing
Voorhees, NJ
Dave.Zarnoch AT sungard DOT com
"Donaldson, Mark"
<Mark.Donaldson@experianems. To:
"'Dave.Zarnoch AT sungard DOT com'" <Dave.Zarnoch AT sungard DOT com>,
com>
veritas-bu AT mailman.eng.auburn DOT edu
Sent by: cc:
veritas-bu-admin AT mailman DOT eng Subject: RE:
[Veritas-bu] HOW TO EMC and SAN? (version)
.auburn.edu
04/30/2003 10:47 AM
Is your intent to write backup images to disk? I'm afraid I don't
understand your question.
If you're wanting to write images to tape, you need to create a disk
storage
unit (or units).
Make a filesystem from your disks - it's easiest to combine the disks using
some sort of volume management software (VxVM) into a single filesystem &
mount it with a name, for example "/images".
Then, using the GUI for ease, create a new storage unit. One choice in the
creation process is to choose a "disk" type storage unit. You then supply
the "/images" name as the destination. Bounce the daemons to pick up the
new storage unit & you're done. You can assign that disk STU to a backup
class just like any other STU.
If this isn't what you're looking for, please clarify your question & post
back.
HTH - M
-----Original Message-----
From: Dave.Zarnoch AT sungard DOT com [mailto:Dave.Zarnoch AT sungard DOT com]
Sent: Wednesday, April 30, 2003 7:08 AM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] HOW TO EMC and SAN? (version)
Additional info:
NBU version 3.4GA
Thanks!
----- Forwarded by Dave Zarnoch/eSourcing/SunGard on 04/30/2003 09:08 AM
-----
Dave Zarnoch
To:
veritas-bu AT mailman.eng.auburn DOT edu
04/30/2003 09:04 cc:
AM Subject: HOW TO EMC and
SAN?
Folks,
We have been given access to EMC disks on our NetBackup Server through HBA
Here's the info:
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
/pci@1f,4000/scsi@3/sd@0,0
1. c0t8d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
/pci@1f,4000/scsi@3/sd@8,0
2. c6t16d4 <EMC-SYMMETRIX-5566 cyl 36826 alt 2 hd 120 sec 64>
/pci@1f,2000/lpfc@1/sd@10,4
3. c6t16d5 <EMC-SYMMETRIX-5566 cyl 36826 alt 2 hd 120 sec 64>
/pci@1f,2000/lpfc@1/sd@10,5
4. c6t16d6 <EMC-SYMMETRIX-5566 cyl 36826 alt 2 hd 120 sec 64>
/pci@1f,2000/lpfc@1/sd@10,6
5. c6t16d7 <EMC-SYMMETRIX-5566 cyl 36826 alt 2 hd 120 sec 64>
/pci@1f,2000/lpfc@1/sd@10,7
At this time, we are using tape robots exclusively...
I didn't receive any info on using disk in the NBU training class
:0(
Can anyone point me in the right direction to resources concerning EMC, NBA
and SAN?
Thanks!
Dave Zarnoch
SunGard Resources Group
SunGard eSourcing
Voorhees, NJ
Dave.Zarnoch AT sungard DOT com
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
