Hello,
i have some problem with restore behind firewall, that means there are some
couple of Server behind a firewall (dmz), the media und master server are in
the normal zoone.
The backups are running very well but the restore works sometime and
sometime they d'ont work. In the logs is nothing you can see about a fault.
The Ports on the firewall are O.K. and should be running on both way.
Some restore they work properly and they opening just 2 ports between a
restore, i d'ont why. The restore they dont work his opened 3 ports all the
time.
Anybody a good idea?
The version of nbu is 3.4_3

The bp.conf on the media server:
 ALLOW_NON_RESERVED_PORTS
SERVER_PORT_WINDOW = 4920 5000
CLIENT_PORT_WINDOW = 4920 5000

Restore logs:
Restore started Tue Dec 03 09:36:15 2002

09:36:17 (521242.xxx) Restore job id 521242 will require 1 image.
09:36:17 (521242.xxx) Media id 251316 is needed for the restore.

09:36:51 (521242.001) Restoring from image created Sat Nov 30 02:17:00 2002
09:36:57 (521242.001) INF - Waiting for mount of media id 251316 on server
bu3030.
09:37:41 (521242.001) INF - Waiting for positioning of media id 251316 on
server bu3030.
09:37:52 (521242.001) INF - Beginning restore from server bu3030 to client
it4410.
09:41:57 (521242.001) Status of restore from image created Sat Nov 30
02:17:00 2002 = termination requested by administrator

09:41:57 (521242.xxx) INF - Status = termination requested by administrator.

Ports opening between restore start and end:
root@bu3030 netstat -a|grep it4410
tcp4       0      0  bu3030.swisslife.4972  it4410.swisslife.4950
ESTABLISHED
tcp4       0      0  bu3030.swisslife.4928  it4410.swisslife.4941
ESTABLISHED
tcp4       0      0  bu3030.swisslife.4926  it4410.swisslife.bpcd
ESTABLISHED
root@bu3030 netstat -a|grep it4410
tcp4       0   1536  bu3030.swisslife.4972  it4410.swisslife.4950
FIN_WAIT_1
tcp4       0      0  bu3030.swisslife.4928  it4410.swisslife.4941
ESTABLISHED
tcp4       0      0  bu3030.swisslife.4926  it4410.swisslife.bpcd
ESTABLISHED


Best regards

Thomas