Hi
Set the ATL to hardware-autoclean rather than software-autoclean (ACSLS or
NBU) - it should in the ATL manual how to do it
Regards
Jim McDonald
__________________________________________________
This email, including any attachments, is intended only for use by the
addressee(s) and may contain confidential and/or personal information and
may also be the subject of legal privilege. Any personal information
contained in this email is not to be used or disclosed for any purpose
other than the purpose for which you have received it. If you are not the
intended recipient, you must not disclose or use the information contained
in it. In this case, please let me know by return email, delete the message
permanently from your system and destroy any copies.
----------------------------------------------------------------------------------------
---------------------- Forwarded by James Mcdonald/GIS/CSC on 11/15/2002
11:23 AM ---------------------------
George Drew <gdrew AT deathstar DOT org>@mailman.eng.auburn.edu on 11/15/2002
11:17:50 AM
Sent by: veritas-bu-admin AT mailman.eng.auburn DOT edu
To: JR Redelinghuys <JR.Redelinghuys AT mgxgroup DOT com>
cc: veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] ACSLS problem
Netbackup can't clean drives in ACS robots (or any other api robot).
Remove the cleaning tapes from the acs pool that you present to
netbackup. That way netbackup will never see the cleaning tapes. It
can't do anything with them anyway (and they can actually cause more
problems), so just keep them out of the way.
George
On Wed, 13 Nov 2002, JR Redelinghuys wrote:
> Hi
>
> We've moved our client's master server from a Tru64 box to a Sun Solaris
8 box. The name of the master server stayed the same. The master has no
drives attached. One Tru64 system acts as the media server with 2 x 9840
and 8 x 9940 drives. The robot is controlled by ACSLS and control host is
the master server. Volume database host = netbackup1-g (master server).
>
> As there are two different types of drives, two different types of
cleaning cartridges are installed. For the 9840 (hcart) drives - HC_CART
and for the 9940 (hcart2) drives HC2_CART. On ACSLS the tapes are known as
STK1U for 9840 hcart tapes and STK2W for the 9940 hcart2 tapes. The problem
comes in we try to inventory the robot. It keeps on failing with the STK2W,
9940 cleaning tapes as it tries to map it and comes up with "NONE" as its
location although it is in the robot. If one changes all the tapes to "none
robotic" and then inventory the robot, the inventory goes through
successfully. When you however try the inventory again, it fails with the
cleaning tape.
>
> Any ideas?
>
> Netbackup 3.4_3
> ACSLS 6
>
> PS. We had to create 2 x dummy drives on the master, as it had no drives.
Without the drives / robot configuration the acsd deamon could not be
started, and without this deamon the inventory could not be done.
>
> JR Redelinghuys
> Veritas I&S - MGX Solutions
> Tel: +27 11 695 2191
> +27 82 459 1091
>
>
>
>
> _______________________________________________
> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
