Peter
Ok an update for you:
I am still getting STATUS 84 errors.
Still unable to use bplabel command, but I did try a theory of mine to see
if it would work. Here goes....

I removed the Barcode ID 0811L1 from Netbackup Media Manager
I removed the actual label from the tape after ejecting it.
I inserted a new barcode label that Netbackup did not know about. Imported
this into the robot.
Ran a backup - failed with Status 84.

I ejected the media, inserted a new tape, and removed all trace of this new
barcode from Netbackup Media Manager
Applied this label to a new physical tape
Imported into robot and re-ran a backup
Worked first time!

Because I cannot get bplabel to work, is there anything else I can do. I am
not sure why it keeps telling me "Request terminated because of volume pool
mismatch". What is it I am missing?

Thank you all.



Simon Weaver
NT Domain Administrator
Ext. 5544
Tel: 02392-705544 (Direct Dial)
Simon.Weaver AT Astrium-Space DOT com


...
This email is for the intended addressee only.
If you have received it in error then you must not use, retain, disseminate
or otherwise deal with it.  Please notify the sender by return email.
The views of the author may not necessarily constitute the views of Astrium 
Limited.
Nothing in this email shall bind Astrium Limited in any contract or obligation.

Astrium Limited, Registered in England and Wales No. 2449259
Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England