Veritas-bu

[Veritas-bu] Problems with Fujifilm and Quantum DLT7000

2002-02-27 19:26:06
Subject: [Veritas-bu] Problems with Fujifilm and Quantum DLT7000
From: ceverett AT virtual DOT com (Craig Everett)
Date: Wed, 27 Feb 2002 16:26:06 -0800
This is a multi-part message in MIME format.

------=_NextPart_000_0012_01C1BFAB.74DFA050
Content-Type: text/plain;
        charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I'm running Datacenter 3.4 on an Ultra 60 with Solaris 8, using an ADIC
Faststor DLT7000 and Fujifilm DLT4 tapes. I'm also using the
on-board/built-in SE SCSI controller that comes with the Ultra60 to attach
the ADIC. I'm getting SCSI timeout errors:

Feb 26 13:30:21 mmc-san-vbu01-p scsi: [ID 365881 kern.info]
/pci@1f,4000/scsi@3,1 (glm1):
Feb 26 13:30:21 mmc-san-vbu01-p         Cmd (0x245c88) dump for Target 5 Lun
0:
Feb 26 13:30:21 mmc-san-vbu01-p scsi: [ID 365881 kern.info]
/pci@1f,4000/scsi@3,1 (glm1):
Feb 26 13:30:21 mmc-san-vbu01-p                 cdb=[ 0x11 0x1 0x0 0x0 0xcc
0x0 ]
Feb 26 13:30:21 mmc-san-vbu01-p scsi: [ID 365881 kern.info]
/pci@1f,4000/scsi@3,1 (glm1):
Feb 26 13:30:21 mmc-san-vbu01-p         pkt_flags=0x0 pkt_statistics=0x61
pkt_state=0x7
Feb 26 13:30:21 mmc-san-vbu01-p scsi: [ID 365881 kern.info]
/pci@1f,4000/scsi@3,1 (glm1):
Feb 26 13:30:21 mmc-san-vbu01-p         pkt_scbp=0x0 cmd_flags=0xe1
Feb 26 13:30:21 mmc-san-vbu01-p scsi: [ID 107833 kern.warning] WARNING:
/pci@1f,4000/scsi@3,1 (glm1):
Feb 26 13:30:21 mmc-san-vbu01-p         Disconnected command timeout for
Target 5.0
Feb 26 13:30:21 mmc-san-vbu01-p glm: [ID 160360 kern.warning] WARNING:
ID[SUNWpd.glm.cmd_timeout.6016]
Feb 26 13:30:21 mmc-san-vbu01-p scsi: [ID 107833 kern.warning] WARNING:
/pci@1f,4000/scsi@3,1/st@5,0 (st12):
Feb 26 13:30:21 mmc-san-vbu01-p         SCSI transport failed: reason
'timeout': giving up

All my Netbackup and Sun patches are current and correct. My firmware is all
up to date as well. Sun and ADIC tell me it's not a good idea to have an
autoloader hanging off of the onboard SE SCSI port and that that is what is
causing my timeouts and subsequent backup failure. Has anyone heard of this
before? Also have you had any timeout issues while using fujifilm tapes on a
quantum dlt7000?


Thanks,

Craig Everett
ASG Professional Services
Systems Consultant
Office 858.277.9544
Fax 858.277.1229
ceverett AT virtual DOT com

------=_NextPart_000_0012_01C1BFAB.74DFA050
Content-Type: text/x-vcard;
        name="Craig Everett.vcf"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
        filename="Craig Everett.vcf"

BEGIN:VCARD
VERSION:2.1
N:Everett;Craig
FN:Craig Everett
ORG:Advanced Systems Group
TITLE:Systems Consultant
TEL;WORK;VOICE:(858) 277-9544 x4007
TEL;CELL;VOICE:(619) 917-6030
TEL;WORK;FAX:(858) 277-1229
ADR;WORK;ENCODING=3DQUOTED-PRINTABLE:;;4995 Murphy Canyon =
Road=3D0D=3D0ASuite 200;San Diego;CA;92123;United States of=3D
 America
LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:4995 Murphy Canyon =
Road=3D0D=3D0ASuite 200=3D0D=3D0ASan Diego, CA 92123=3D0D=3D0AUnited =3D
States of America
URL:
URL:http://www.virtual.com
EMAIL;PREF;INTERNET:ceverett AT virtual DOT com
REV:20020129T183434Z
END:VCARD

------=_NextPart_000_0012_01C1BFAB.74DFA050--


<Prev in Thread] Current Thread [Next in Thread>