run :
#bpps -a
and fond out if all the daemons are up, otherwase kill and restart NBU
(bp.kill_all/S77netbackup)

Adam
----- Original Message -----
From: "David A. Chapa" <david AT xbpadm-commands DOT com>
To: <veritas-bu-admin AT mailman.eng.auburn DOT edu>;
<veritas-bu AT mailman.eng.auburn DOT edu>
Sent: Tuesday, February 19, 2002 7:14 PM
Subject: RE: [Veritas-bu] Error 219: required storage unit not available


> tpconfig -d
>
> make sure it matches the density type of your media you have created
>
> vmquery -a -bx | more
>
> For example,  your storage unit might be of type dlt2 and your media of
type
> dlt.  These are different densities to NBU/MM.
>
> David
>
> <><><><><><><><><><><><><><><><><><><><>
> David A. Chapa
> NetBackup Consultant
> DataStaff, Inc.
> http://www.consulting.datastaff.com
> 847 413 1144
> ---------------------------------------
> NBU-LSERV AT datastaff DOT com - Adv. Scripting
> http://www.xbpadm-commands.com
>
> >  -----Original Message-----
> > From: veritas-bu-admin AT mailman.eng.auburn DOT edu
> > [mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu]
> > Sent: Tuesday, February 19, 2002 6:07 PM
> > To: veritas-bu AT mailman.eng.auburn DOT edu
> > Subject: [Veritas-bu] Error 219: required storage unit not available
> >
> > Unable to troubleshoot this error in Netbackup Datacenter 3.4 on Solaris
> > 8.
> >
> > Status code: 219  Message: the required storage unit is unavailable.
> > Storage unit is Qualstar TLS-4440 and is configured properly in the
> > devices module.  Able to move media in/out of library w/o issue.
> > Attempting to run a manual backup triggers this error.  All necessary
> > daemons are running.  The class this backup belongs to is assigned to
the
> > correct storage unit. Bpsched log has following entries:
> >
> > 17:01:18 [3638] <2> start_bptm: Received BPCD success message
> > 17:01:18 [3638] <4> get_db_info: no available storage units
> > 17:01:18 [3638] <8> bpsched_main: failed getting database
> > information
> > 17:01:18 [3638] <16> log_in_errorDB: scheduler exiting - no storage
> > units available for use (213)
> >
> > Appreciate any insight/help!
> >
> > Thanks in advance.
> >
> > Tom
> >
> >
>