[Veritas-bu] REQUIRED_INTERFACE question
2002-02-19 18:48:48
All files are the same on every node. Because this is a Tru64 cluster each
filesystem is shared among all nodes which means there is one bp.conf file
for every node.
NBU apparently has problems with this because every time a stream needs to
mount another tape it errors out with a 40.
-----Original Message-----
From: lkingery AT veritas DOT com [mailto:lkingery AT veritas DOT com]
Sent: Tuesday, February 19, 2002 3:25 PM
To: David_Cornely AT intuit DOT com
Subject: Re: [Veritas-bu] REQUIRED_INTERFACE question
It's probably not working, just being ignored.
Since the file is read, not executed, I wouldn't expect that to work
at all.
The real question is probably if you need R_I at all (probably not). If
you really do need it, do you have a different hosts file on each node?
>
> I'm wondering if anyone has ever done this:
> Used REQUIRED_INTERFACE=`/usr/bin/hostname` instead of explicitly
specifying
> the hostname in the client's bp.conf file.
>
> I'm encountering issues with Tru64 clusters and because each node shares
the
> exact same bp.conf file I'm trying to come up with a work around. I
tested
> this on a standalone sun client and it "appeared" to work. Any thoughts
> would be appreciated. Thanks.
>
> -Dave
> _____________________
> David Cornely
> San Diego Storage Team
> 858.784.4852
> david_cornely AT intuit DOT com
>
> _______________________________________________
> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
|
|
|