I am running into problems when i try and use my media server.

here is what my configuration looks like..

master----firewall----slave

i have taken the firewall down so it is wide open

i have a class setup to backup the slave and use the tape drive on the slave.

the backup starts and errors out with a 58,

if i backup the client to the master it works fine only
when i use the slave devices do i see this problem.


nothing errors out in the bpcd log but in the bpbrm

i see some strange errors:

10:17:11 [29276] <4> bpbrm main: INITIATING: version NetBackup 3.2GA
2000011416
10:17:11 [29276] <2> logparams: -backup -mt 2 -to 0 -S master -mediasvr
slave -mpx 8 -maxf
rag 0 -v -D 13 -rt 8 -rn 4 -stunit slave-L700 -cj 6 -pool slave 
10:17:11 [29276] <2> check_remote_allowed: Remote servers allowed
10:17:11 [29276] <2> bpbrm start_bpcd: getservbyname returned port 13782
10:17:11 [29276] <2> getsockconnected: host=slave service=bpcd
address=172.16.14.155 protocol=
tcp reserved port=13782
10:17:11 [29276] <2> getsockconnected: Connect to pdcbackup on port 1022
10:18:41 [29276] <2> sighdl: timed out
10:18:41 [29276] <16> get_long: (1) cannot read (byte 1) from network:
Interrupted system call (4)
10:18:41 [29276] <16> bpcr_connect: bpcd protocol error - failed to read
connected message.
10:18:41 [29276] <16> bpbrm start_bpcd: cannot connect to slave. Errno =
4: Interrupted system
 call
10:18:42 [29276] <4> bpbrm Exit: ERROR 58 sent to parent process