Has this stacker worked with NetBackup in the past?  The malfunction is
something new?

What kind of unit is it?

david

-----Original Message-----
From: veritas-bu-admin AT Eng.Auburn DOT EDU
[mailto:veritas-bu-admin AT Eng.Auburn DOT EDU]On Behalf Of Sam Don
Sent: Tuesday, August 15, 2000 10:37 AM
To: david AT datastaff DOT com; Veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] Drive being Downed!!

# robtest
Configured robots with local control supporting test utilities:
  TSD(2)     robotic path = /dev/sg/c1t5l1
  TLD(0)     robotic path = fileserver:fsp0

Robot Selection
---------------
  1)  TSD 2
  2)  TLD 0
  3)  none/quit
Enter choice: 1

Robot selected: TSD(2)   robotic path = /dev/sg/c1t5l1

Invoking robotic test utility:
/usr/openv/volmgr/bin/tsdtest -r /dev/sg/c1t5l1 -d1 /dev/rmt/0cbn

Opening /dev/sg/c1t5l1
Enter tsd commands (? returns help information)
pos s5
position is not supported on this robot
m s1 d1
1 is an invalid slot number
---

Regards,
SD

>From: "David A. Chapa" <david AT datastaff DOT com>
>To: "Sam Don" <don_sam AT hotmail DOT com>, <Veritas-bu AT mailman.eng.auburn 
>DOT edu>
>Subject: RE: [Veritas-bu] Drive being Downed!!
>Date: Tue, 15 Aug 2000 07:52:19 -0500
>
>Have  you tried robtest to see if you can move the robotics there?
>
>Once you get in to robtest, submit this command:
>
>pos s5
>
>Position to slot 5.
>
>If the stacker doesn't support that, then just try to move a tape to a
>drive
>
>m s1 d1
>
>If the robotics do not move, it may be that the robotics are not configured
>properly.
>
>David Chapa
>
>-----Original Message-----
>From: veritas-bu-admin AT Eng.Auburn DOT EDU
>[mailto:veritas-bu-admin AT Eng.Auburn DOT EDU]On Behalf Of Sam Don
>Sent: Monday, August 14, 2000 4:31 PM
>To: Veritas-bu AT mailman.eng.auburn DOT edu
>Subject: [Veritas-bu] Drive being Downed!!
>
>Hi,
>
>My DLT4700 stacker attached to the Master server for backing up the NB DB
>is
>being downed constantly.
>
># tail /var/adm/messages
>Aug 14 14:31:08 tsdd[6856]: TSD(2) going to UP state
>Aug 14 14:31:08 ltid[6809]: Received Type=2 message from TSD(2),
>RobotConnect continuing
>Aug 14 14:31:08 ltid[6809]: LTID - Sent ROBOTIC request, Type=1, Param2=0
>Aug 14 14:31:08 tsdd[6856]: TSD(2) MountTape FULL25 on drive 1, from slot 1
>Aug 14 14:31:08 tsdd[7424]: TSD(2) [6856] opening robotic path
>/dev/sg/c1t5l1
>Aug 14 14:31:10 tsdd[7424]: TSD(2) [6856] Read_element_status error
>Aug 14 14:31:10 tsdd[7424]: TSD(2) [6856] sense key 0x0, ASC 0x0, ASCQ 0x0
>Aug 14 14:31:10 tsdd[6856]: DecodeMount(): TSD(2) drive 1, Actual status:
>Unable to sense robotic device
>Aug 14 14:31:10 tsdd[6856]: TSD(2) going to DOWN state, status: Unable to
>sense robotic device
>Aug 14 14:31:10 tsdd[6856]: TSD(2) [6856] opening robotic path
>/dev/sg/c1t5l1
>
>Please help! Why is it unable to sense the element?
>
>Thanks,
>SD
>________________________________________________________________________
>Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
>_______________________________________________
>Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
>http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
>_______________________________________________
>Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
>http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu