I see the "Remove This Column" option list with the same 4 choices just
like you do... you're probably correct that the 'Add Columns' option
was added to the list recently (although 'Choose Table Columns' seems
logical to me because it allows you to add/remove, etc.)
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of George Sinclair
Sent: Tuesday, October 02, 2012 2:32 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] How can I see both volumes and save sets in
nmc?
On 2012-10-02 07:39, Goslin, Paul wrote:
> Weird...
> I'm running a 7.6 Console and 'Volume' is a valid column option on the
> 'Save Sessions' tab for me ...
What do you see when you Right-click in the Save Sessions tab on one of
the column headings? Do you see the following four choices:
"Remove This Column"
"Choose Table Columns..."
"Print... Ctrl-P"
Export
Or do you also see an "Add Columns" choice? I don't see that choice,
only the above four. Apparently, the "Add Columns" choice was added in a
later release.
Anyway, I only had to go into the "Choose Table Columns" and add Volume
as an optional column, and that fixed it. But the Volume column wasn't
checked by default.
George
> -----Original Message-----
> From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
> On Behalf Of George Sinclair
> Sent: Monday, October 01, 2012 5:48 PM
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: Re: [Networker] How can I see both volumes and save sets in
> nmc?
>
> On 2012-10-01 17:42, Bowersock, Bryan wrote:
>> I am running Networker 8.0.0.1 and that is new to the NMC. I'm
> guessing you are on an earlier version (7.6.x)...
> Correct. Thanks.
>> -Bryan
>>
>> -----Original Message-----
>> From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
>> On Behalf Of George Sinclair
>> Sent: Monday, October 01, 2012 5:21 PM
>> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
>> Subject: Re: [Networker] How can I see both volumes and save sets in
> nmc?
>> OK, Duh! I have it now, guys. Sheesh! Thanks to Bingo and Bryan. That
>> was too obvious. Good grief, Charlie Brown! :-[
>>
>> I also see that I can adjust the order that the column headings
>> appear
> in using the up and down arrows in the list. Nice. That was my next
> question.
>> Bryan, I must be missing something obvious, but I don't see the 'Add
> Columns' option, only "Remove This Column", "Choose Table
> Columns...", "Print... Ctrl-P" and Export.
>> George
>>
>> On 2012-10-01 16:30, Bowersock, Bryan wrote:
>>> Right-click in the Save Sessions tab on one of the column headings,
> choose Add Columns>>> Volume. Or you can "Choose Table Columns..."
> and click the checkbox for "Volume".
>>>
>>>
>>> Bryan Bowersock
>>> Storage Administrator - Tampa, FL
>>>
>>>
>>>
>>> -----Original Message-----
>>> From: EMC NetWorker discussion
>>> [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
>>> On Behalf Of George Sinclair
>>> Sent: Monday, October 01, 2012 4:07 PM
>>> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
>>> Subject: Re: [Networker] How can I see both volumes and save sets in
> nmc?
>>> On 2012-10-01 15:34, bingo wrote:
>>>> Just go to the 'Save Sessions' tab and click the headline. Then
> select the appropriate columns.
>>>> That's it.
>>> Maybe I wasn't clear in my post. I'm under Monitoring, and I select
> the 'Save Sessions' tab, but that doesn't show me the volume names.
> Instead, it reports the following columns:
>>> Client Name, Save Set, Group, Level, Start Time, Duration, Device,
>>> Rate (KB/S), Size
>>>
>>> I also want to be able to see the affected volumes that are being
> written to with their respective save sets. How can I report all of
> that so I don't have to keep jumping back and forth between windows?
> Is there anything in nmc to mimic the nwadmin Sessions window?
>>>> +------------------------------------------------------------------
>>>> +-
>>>> +-
>>>> +-
>>>> +-
>>>> |This was sent by carsten_reinfeld AT avus-cr DOT de via Backup Central.
>>>> |Forward SPAM to abuse AT backupcentral DOT com.
>>>> +------------------------------------------------------------------
>>>> +-
>>>> +-
>>>> +-
>>>> +-
>>> --
>>> George Sinclair
>>> Voice: (301) 713-3284 x210
>>> - The preceding message is personal and does not reflect any
>>> official or unofficial position of the United States Department of
>>> Commerce -
>>> - Any opinions expressed in this message are NOT those of the US
> Govt.
>>> -
>>>
>> --
>> George Sinclair
>> Voice: (301) 713-3284 x210
>> - The preceding message is personal and does not reflect any official
>> or unofficial position of the United States Department of Commerce -
>> - Any opinions expressed in this message are NOT those of the US
Govt.
>> -
>>
>
> --
> George Sinclair
> Voice: (301) 713-3284 x210
> - The preceding message is personal and does not reflect any official
> or unofficial position of the United States Department of Commerce -
> - Any opinions expressed in this message are NOT those of the US Govt.
> -
--
George Sinclair
Voice: (301) 713-3284 x210
- The preceding message is personal and does not reflect any official or
unofficial position of the United States Department of Commerce -
- Any opinions expressed in this message are NOT those of the US Govt. -
|
