In the client configuration for the Server Clone Storage Nodes field was blank.
I just put there "nsrserverhost" and it finally works.

Tks for all.   

Marcelo Valinote 

-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On 
Behalf Of George Sinclair
Sent: Tuesday, April 03, 2012 2:45 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] nsrstage error

On 2012-04-03 12:56, Valinote, Marcelo F wrote:
> I have additional storage nodes. I tried mounting tapes before issue the 
> command, as suggested, but still doesn`t work.

Maybe it's getting confused between the writing storage node and the 
recovery storage node. According to the man page for nsrstage,
you can specify '-J storage-node' for the recovery part. At least on 
Linux, anyway. Not sure about Windows. Try the command again as:

nsrstage -s server -v -J storage-node -b destination-pool -m -S ssid

You should probably also fully qualify the ssid as ssid/cloneid and use 
the long format ssid(53) as opposed to the short format (default).

Another way to possibly force it to use specific tapes on a given 
storage node would be to simply mark the ones on the node that you don't 
want to use for writing as read-only.

The man page for nsrstage also suggests taking a look at:  
nsr_storage_node(5). In particular, look at:

the "storage  nodes" attribute
the "clone storage node" attribute
the "recover storage nodes" attribute

Maybe some of those attributes need to be set or changed? Take a look at 
what those fields list for the server's NSR client resource and the order.

George


> Tks.
>
> Marcelo Valinote
>
> -----Original Message-----
> From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] 
> On Behalf Of bingo
> Sent: Tuesday, April 03, 2012 1:34 PM
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: [Networker] nsrstage error
>
> If you have an additional storage node, do not forget that the media might be 
> requested on another node. Unfortunately you can not specify the writing 
> storage node with the command. However, if you mount the media before you 
> issue the command, NW should take the media right away.
>
> +----------------------------------------------------------------------
> |This was sent by carsten_reinfeld AT avus-cr DOT de via Backup Central.
> |Forward SPAM to abuse AT backupcentral DOT com.
> +----------------------------------------------------------------------
>
> To sign off this list, send email to listserv AT listserv.temple DOT edu and 
> type "signoff networker" in the body of the email. Please write to 
> networker-request AT listserv.temple DOT edu if you have any problems with 
> this list. You can access the archives at 
> http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>
> To sign off this list, send email to listserv AT listserv.temple DOT edu and 
> type "signoff networker" in the body of the email. Please write to 
> networker-request AT listserv.temple DOT edu if you have any problems with 
> this list. You can access the archives at 
> http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER


-- 
George Sinclair
Voice: (301) 713-3284 x210
- The preceding message is personal and does not reflect any official or 
unofficial position of the United States Department of Commerce -
- Any opinions expressed in this message are NOT those of the US Govt. -

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER