|
Re: [Networker] nsrstage error
2012-04-03 13:45:51
On 2012-04-03 12:56, Valinote, Marcelo F wrote:
I have additional storage nodes. I tried mounting tapes before issue the
command, as suggested, but still doesn`t work.
Maybe it's getting confused between the writing storage node and the
recovery storage node. According to the man page for nsrstage,
you can specify '-J storage-node' for the recovery part. At least on
Linux, anyway. Not sure about Windows. Try the command again as:
nsrstage -s server -v -J storage-node -b destination-pool -m -S ssid
You should probably also fully qualify the ssid as ssid/cloneid and use
the long format ssid(53) as opposed to the short format (default).
Another way to possibly force it to use specific tapes on a given
storage node would be to simply mark the ones on the node that you don't
want to use for writing as read-only.
The man page for nsrstage also suggests taking a look at:
nsr_storage_node(5). In particular, look at:
the "storage nodes" attribute
the "clone storage node" attribute
the "recover storage nodes" attribute
Maybe some of those attributes need to be set or changed? Take a look at
what those fields list for the server's NSR client resource and the order.
George
Tks.
Marcelo Valinote
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of bingo
Sent: Tuesday, April 03, 2012 1:34 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] nsrstage error
If you have an additional storage node, do not forget that the media might be
requested on another node. Unfortunately you can not specify the writing
storage node with the command. However, if you mount the media before you issue
the command, NW should take the media right away.
+----------------------------------------------------------------------
|This was sent by carsten_reinfeld AT avus-cr DOT de via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the body of the email. Please write to networker-request
AT listserv.temple DOT edu if you have any problems with this list. You can access the
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the body of the email. Please write to networker-request
AT listserv.temple DOT edu if you have any problems with this list. You can access the
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
--
George Sinclair
Voice: (301) 713-3284 x210
- The preceding message is personal and does not reflect any official or
unofficial position of the United States Department of Commerce -
- Any opinions expressed in this message are NOT those of the US Govt. -
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the body of the email. Please write to networker-request
AT listserv.temple DOT edu if you have any problems with this list. You can access the
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|
