Re: [Networker] Is the 'tapes' command wrong in 7.5.x?
2010-09-08 09:54:52
EMC will suggest you upgrade to v7.6+ service pack. /grin
Semper fidelis, /ALE
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Manel Rodero
Sent: Wednesday, September 08, 2010 8:41 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] Is the 'tapes' command wrong in 7.5.x?
Hello,
We've recently upgraded to 7.5.3 (from 7.4.4 under W2K8 x64) and we've
seen that the 'tapes' command is not reporting our drives as usual. The
output is like this:
[email protected]:\\.\Tape0 is <>
[email protected]:\\.\Tape1 is <>
The 'inquire' command works as expected:
[email protected]:TSSTcorpDVD-ROM TS-L333AD350|CD-ROM
[email protected]:DELL PERC 6/i 1.22|Disk
[email protected]: RAID DummyDevice 0001|Unknown Device Type
[email protected]:QUANTUM Scalar i500 5A21|(Unknown Device Type c)
S/N: ADICA0C0199616
VENN=QUANTUM FC IOB
A0C0199616
IENN=500308C09FD98B51
IEPN=500308C09FD98B52
WWNN=500308C09FD98B51
WWPN=500308C09FD98B52
PORT=00000001
[email protected]:HP Ultrium 4-SCSI H57Z|Tape
[email protected]:HP Ultrium 4-SCSI H57Z|Tape, \\.\Tape1
S/N: F09FD98004
ATNN=HP Ultrium 4-SCSI
F09FD98004
WWNN=500308C09FD98004
WWPN=500308C09FD98005
WW2N=500308C09FD98004
PORT=00000001
[email protected]:QUANTUM Scalar i500 585G|Autochanger (Jukebox),
\\.\Changer0
S/N: QUANTUMA0C0199616_LLA
ATNN=QUANTUM A0C0199616_LLA
Is this an error?
Thanks.
--
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|