> In my case, the tape volume is not in the media database, and I don't want to
> re-label. I need to scan it in. Essentially importing a volume from a foreign
> Networker server.
In that case, then just stick the tape into the drive and run the scanner
command.
However, before running scanner, you need to make sure that the volume pool
that the tape belongs, as well as all the client that have saveset backups on
that tape, is defined in the local n/w server. Otherwise NetWorker cannot scan
in the information correctly.
This information can be retrieved by going back to the n/w server where the
tape was created from.
+----------------------------------------------------------------------
|This was sent by wl905 AT yahoo DOT ca via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|