YES - You'll most likely have to delete and re-create it... (I would
just to be safe).

We have to do this usually following any reboot of our server.... It
only takes a few minutes unless you've got a lot of devices assigned to
pools... You may have to un-link those first...  

We've tried the persistent binding solution mentioned already, and it
does not seem to work all the time... 

> -----Original Message-----
> From: EMC NetWorker discussion 
> [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On Behalf Of psoni
> Sent: Friday, January 29, 2010 2:02 PM
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: [Networker] inquire shows //./Tape instead of //./Tape#
> 
> > I'd do that immediately and then see if the problem goes away. It 
> > could be a bug in the Plug And Play driver
> 
> 
> Do I have to reconfigure the jukebox/devices in NMC after 
> applying persistent binding through Win plug&play ?
> 
> +-------------------------------------------------------------
> ---------
> |This was sent by soni.parth AT gmail DOT com via Backup Central.
> |Forward SPAM to abuse AT backupcentral DOT com.
> +-------------------------------------------------------------
> ---------
> 
> To sign off this list, send email to 
> listserv AT listserv.temple DOT edu and type "signoff networker" in 
> the body of the email. Please write to 
> networker-request AT listserv.temple DOT edu if you have any 
> problems with this list. You can access the archives at 
> http://listserv.temple.edu/archives/networker.html or via RSS 
> at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
> 

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER