Hello,
Thank you John and Tim,
I'll check the possibility of connecting the old library to the new
server but, at this moment, I'm at thome and I don't remember if the
new server has a SCSI card. I suppose that is not the case because it
has now dual FC cards and 4-network cards :-(
And, yes, I know that copying the nsr directory is not supported by
EMC. But, what if I do the DR in the old server and then I copy the
NSR dir to the new server? (in this case I'll have access to the old
tape library).
I'll check all these solutions next week as I'm now out of the office
during this week.
Thank you. I'll post the final option.
Thanks.
Quoting John Brekelbaum <jbrekelbaum AT GMAIL DOT COM>:
I have copied the NSR dir to a new server (windows) and reinstalled
networker and it worked fine. However, next time I did it EMC support
was involved and siad I could do it but they would not support me if I
ran into issues.
On 10/9/09, Tim Mooney <Tim.Mooney AT ndsu DOT edu> wrote:
In regard to: [Networker] Finishing a hardware upgrade: which Legato...:
Hello,
I'm finishing a hardware upgrade of our Backup server.
As we've changed from SDLT320 to LTO-4 we will maintain (powered off) our
old
server: Windows Server 2003 with Legato 7.4.4 and the indexes, media, etc.
until the last data in the tapes will expire one year from now.
That's a good way of doing it.
So, the new server is installed with Windows Server 2008 and the new
changer
(a Scalar i500 with LTO-4 drives) but I would like to know which Networker
version is better to install at this moment: 7.4.4 or 7.5.x?
The depends. If 7.4.4 was working well for you in your environment on
your previous server, then I recommend you start with 7.4.4 again on your
new server. When you're changing a lot of things (server hardware, server
OS, jukebox) already, you'll make it easier on yourself by not also
changing NetWorker versions. Too many changes at once can make it much
harder to track down what might be causing any new problems you're seeing.
Once you've been through anywhere from two weeks to a full backup cycle
with your new environment and you haven't detected any new problems, then
you can start thinking about whether 7.5.1 would be a good upgrade for
you.
And, I would like to know how to export client and group information
(well,
all the config data except indexes and media) from the old Legato and
import
to the new server. Any easy manner? (not manually ;-)
The recommended way you do this is by going through the disaster recovery
(DR) procedure. You start with the tape that contained the last bootstrap
backup on your old server and you use mmrecov to load your configuration
from the bootstrap tape. It's all documented in the disaster recovery
documentation.
Since you're also switching tape formats, you have a potential roadblock
there, in that your new server doesn't have easy access to your old tapes.
You may have to temporarily connect 1 tape drive from your old jukebox
up to your new server. You don't have to make the entire jukebox
available, just one tape drive, and then manually load the tape in the
drive.
If you do the DR, it's even more strongly recommended that you start with
a version of NetWorker that's at least in the same series (e.g. 7.4.x) as
the one you were running on your old system.
You might be able to completely bypass the DR procedure and just copy your
nsr directory from you old server to your new server, *then* install the
NetWorker server software, then relicense NetWorker, but I've never tried
that on a Windows-based NW server.
Good luck!
Tim
--
Tim Mooney Tim.Mooney AT ndsu DOT
edu
Enterprise Computing & Infrastructure 701-231-1076 (Voice)
Room 242-J6, IACC Building 701-231-8541 (Fax)
North Dakota State University, Fargo, ND 58105-5164
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type
"signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu
and type "signoff networker" in the body of the email. Please write
to networker-request AT listserv.temple DOT edu if you have any problems
with this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
--
Manel Rodero Blánquez
o o o IT Systems Manager
o o o Laboratori de Càlcul
o o o Facultat d'Informàtica de Barcelona
U P C Universitat Politècnica de Catalunya - Barcelona Tech
E-mail : manel AT fib.upc DOT edu
Tel. : +34 93 401 0847
Web : http://www.fib.upc.edu/
======================================================================
Abans d'imprimir aquest missatge, si us plau, assegureu-vos que sigui
necessari. El medi ambient és cosa de tots.
Antes de imprimir este mensaje, por favor, asegúrese de que sea
necesario. El medio ambiente es cosa de todos.
Before printing this message, please be sure it is necessary. The
environment is everybody's business.
----------------------------------------------------------------------
ADVERTÈNCIA / TEXT LEGAL: Aquest missatge pot contenir informació
confidencial o legalment protegida i està exclusivament adreçat a la
persona o entitat destinatària. Si vosté no es el destinatari final o
persona encarregada de recollir-lo, no està autoritzat a llegir-lo,
retenir-lo, modificar-lo, distribuir-lo, copiar-lo ni a revelar el seu
contingut. Si ha rebut aquest correu electrònic per error, li preguem
que informi al remitent i elimini del seu sistema el missatge i el
material annex que pugui contenir. Gràcies per la seva col·laboració.
ADVERTENCIA / TEXTO LEGAL: Este mensaje puede contener información
confidencial o legalmente protegida y está exclusivamente dirigido a
la persona o entidad destinataria. Si usted no es el destinatario
final o persona encargada de recogerlo, no está autorizado a leerlo,
retenerlo, modificarlo, distribuirlo, copiarlo ni a revelar su
contenido. Si ha recibido este correo electrónico por error, le
rogamos que informe al remitente y elimine de su sistema el mensaje y
el material anexo que pudiera contener. Gracias por su colaboración.
WARNING / LEGAL TEXT: This message is intended only for the use of the
individual or entity to which it is addressed and may contain
information which is privileged, confidential, proprietary, or exempt
from disclosure under applicable law. If you are not the intended
recipient or the person responsible for delivering the message to the
intended recipient, you are strictly prohibited from disclosing,
distributing, copying, or in any way using this message. If you have
received this communication in error, please notify the sender and
destroy and delete any copies you may have received.
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the body of the email. Please write to networker-request
AT listserv.temple DOT edu if you have any problems with this list. You can access the
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|