Re: [Networker] sl500 library loading from CAP

You can use the command below to verify how the jukebox is configured.
Maybe you don't have all access ports configured at the moment. You are
interested in the line that says ports:

# nsrjb -vV
setting verbosity level to `1'
status:
Jukebox handle being opened at port
/dev/scsi/changer/c4t500104F0007ED75Fd0
Jukebox Vendor  id    STK
Jukebox Product id    SL500
jukebox id: 0
options:  volume_tags elements_status barcode read_elem_unload_fail
        #       #_pairs pairs
drives: 9       1       1-9
ports:  25      1       1-25
slots:  224     1       1-224
Jukebox handle being closed at port
/dev/scsi/changer/c4t500104F0007ED75Fd0
Regards,

Mark Leese, MBCS
Account Technical Lead, 
Data Protection, EMEA  
Application Hosting Services 
HP TSG Outsourcing Services 
Assigned to Pfizer
PFIZER LEGAL NOTICE 
     
Unless expressly stated otherwise, this message is confidential and may
be privileged. It is intended for the addressee(s) only. Access to this
e-mail by anyone else is unauthorised. If you are not an addressee, any
disclosure or copying of the contents of this e-mail or any action taken
(or not taken) in reliance on it is unauthorized and may be unlawful. If
you are not an addressee, please inform the sender immediately. 
     
Pfizer Limited is registered in England under No. 526209 with its
registered office at Ramsgate Road, Sandwich, Kent CT13 9NJ  
 
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Jon Fraley
Sent: 11 August 2009 13:48
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] sl500 library loading from CAP

Importing tapes in our SL500, we also have the expanxion, we just load
the cap and issue nsrjb -d.  

Jon


On Mon, 2009-08-10 at 12:46 -0400, Joe Beck wrote:
> We recently got an sl500 with an expansion.
> so I have (3) 5-port CAPs (Access Ports).
> 
> Does anyone know how to move tapes using nsrjb from the 2nd & 3rd CAPs
into
> slots in the library.
> 
> Here's what I've tried:
> root@back01g-tcc7 456# nsrjb -d  -P1-15 -S16-30
> Error: Cannot find port 6 for jukebox `sl500_lab01'.
> 39077:nsrjb: error, Jukebox command terminated with errors.
> 
> root@back01g-tcc7 462# nsrjb -d  -P1-5 -S16-20
> Load the cartridges into the ports, and enter Yes to continue. Yes
> Info: Moving media from port 1 to slot 16.
> Info: Moving media from port 2 to slot 17.
> Info: Moving media from port 3 to slot 18.
> Info: Moving media from port 4 to slot 19.
> Info: Moving media from port 5 to slot 20.
> Info: Depositing 5 cartridges.
> 
> So, it can't find port 6 which I would have thought would be the 1st
slot of
> the 2nd CAP...
> I tried a few other things as well but nothing successfully.
> 
> Any help is appreciated,
> Joe
> 
> To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
> 

To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER