By default it shouldn't do it, starting with 7.3 the idle timer is turned off,
and you have to turn it on for it to automatically eject tapes. So the fields
you would want to look at would be properties of your autochanger, under the
timer tab. Look to see what the idle devic timeout is set to. If this is set to
a number, set it to 0.
Jeff
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Werth, Dave
Sent: Friday, June 05, 2009 3:47 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] Disable automatic unload
We upgraded from 7.2.2 to 7.5.1 yesterday. I prefer that the tapes are not
automatically unloaded from the drives in our jukebox. Is there any way to
disable this?
Thanks, Dave.
Dave Werth
Garmin AT, Inc.
Salem, Oregon
________________________________
This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient. If you are not the intended recipient, please be
aware that any disclosure, copying, distribution or use of this e-mail or any
attachment is prohibited. If you have received this e-mail in error, please
contact the sender and delete all copies.
Thank you for your cooperation.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|