Hello,
Mixing SN and Master server with different version of networker is not an 
issue, we had been running on similar setup for years.
You can find HP drivers at this link.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3454494&taskId=135&prodTypeId=12169&prodSeriesId=3454484&lang=en&cc=us
HTH



Marc Couture <marc.couture AT SIT.ULAVAL DOT CA> 
Sent by: EMC NetWorker discussion <NETWORKER AT LISTSERV.TEMPLE DOT EDU>
04/28/2009 01:31 PM
Please respond to
EMC NetWorker discussion <NETWORKER AT LISTSERV.TEMPLE DOT EDU>; Please respond 
to
Marc Couture <marc.couture AT SIT.ULAVAL DOT CA>


To
NETWORKER AT LISTSERV.TEMPLE DOT EDU
cc

Subject
Can mix Networker x32 and x64 version ?






Hi everybody,


We plan to migrate to Networker 7.5.1. Now we use 7.4.4 with a Windows 
master server and 2 storagenodes and 4 storagenode dedicated. All these 
servers use the 32 bits Networker version x86 on a Windows 32 bits 
environment. We change the master server for more performance.

On my new Networker master server, I plan to install an x64 bits Windows 
OS (windows 2003 or windows 2008 ?) with the Networker x64 version. Should 

install the same version (64 bits) on all my storagenodes ? Is it possible 

to mix x32 and x64 for my storagenodes and master server ?

Is the x64 version offer more stability than the version x32 ?

I use a STK Library with HP LTO3 drive FC. Does exist the drivers for 
these device for a Windows 2003 x64 ? for Windows 2008 X64 ?

What is your recommendations.

Thanks

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type 
"signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER



To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER