I've got a few 7.3.x clients that are not producing the verbose/debug
output. All the 7.2.x and under clients that I've checked ARE producing
the extra output. So much for complete backward compatibility - the
backups and restores work but major portions of our scripted monitoring
and management environment have been broken by the upgrade to v7.4.4.
Heavy sigh.
Thanks.
Teresa
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Goslin, Paul
Sent: Wednesday, March 11, 2009 1:18 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Extra verbose output
This appears to be EMCs subtle(?) way of reminding you that your clients
need to be updated to match the server.....
I was told by EMC support that clients had to be at least 7.2 or greater
to be supported with a 7.4 or above server. I've noticed since we
started running 7.4.4, any client that is not also at 7.4 or greater
produces this 'verbose' output in the savegroup completions... Any
client that is 7.4 or greater does not. I doubt there is anything that
can be done to suppress this other than to upgrade your clients to 7.4
or greater...
> -----Original Message-----
> From: EMC NetWorker discussion
> [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On Behalf Of Teresa Biehler
> Sent: Wednesday, March 11, 2009 11:17 AM
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: Re: [Networker] Extra verbose output
>
> "Verbose" is not checked in the Group options. This began
> happening with the upgrade of the NW server to v7.4.4. The
> output looks like debug output to me - the kind that normally
> would appear with a savegrp -v.
>
> -T
>
> -----Original Message-----
> From: Mathew Harvest [mailto:Mathew.HARVEST AT sis.qld.gov DOT au]
> Sent: Tuesday, March 10, 2009 8:38 PM
> To: EMC NetWorker discussion; Teresa Biehler
> Subject: RE: [Networker] Extra verbose output
>
> Hey Teresa
>
> Another thing to try (although it would be a little odd if it
> just magically started happening) is you can set verbose
> output for a group from the NMC
>
> You have to go into diagnostic mode (View -> Diagnostic) Then
> go into the properties of a group Advanced -> Options and
> check if the verbose option is ticked...
>
>
> Mat
>
> -----Original Message-----
> From: EMC NetWorker discussion
> [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On Behalf Of Teresa Biehler
> Sent: Wednesday, 11 March 2009 6:05 AM
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: [Networker] Extra verbose output
>
> We just upgraded to v7.4.4. The savegroup completion emails
> now contain extra information that we used to get with a
> savegrp -v. Is anyone else seeing this? This looks like
> debugging information rather than normal output. Is there a
> flag somewhere to get just the normal savegrp completion
> information?
>
> An example is at the bottom of this email. Our NW server is
> Solaris if that matters.
>
> Thanks.
> Teresa
>
> -----Original Message-----
> Subject: 12noon-weekly Completion
>
> NetWorker savegroup: (notice) 12noon-weekly completed, Total
> 1 client(s), 1 Succeeded. Please see group completion details
> for more information.
>
> Succeeded: test_client
>
> Start time: Tue Mar 10 12:17:29 2009
> End time: Tue Mar 10 12:34:08 2009
>
>
> --- Successful Save Sets ---
>
> Successful Save Sets written to verified media noted with "V"
> in first column.
>
> * sage:All type: NSR client description;
> * test_client:All pools supported: Yes;
> * test_client:All browse time supported: Yes;
> * test_client:All multiple balanced streams supported: Yes;
> * test_client:All remote user: root;
> * test_client:All groups: root, other, bin, sys, adm, uucp,
> mail, tty, lp, nuucp, daemon, root;
> * test_client:All arch: sparc;
> * test_client:All client OS type: Solaris;
> * test_client:All CPU type: sun4u;
> * test_client:All CPUs: 1;
> * test_client:All kernel arch: sun4u;
> * test_client:All machine type: workstation;
> * test_client:All MB used: 91935;
> * test_client:All NetWorker version: 7.2.Build.494;
> * test_client:All OS: SunOS 5.10;
> * test_client:All version: 7.2.Build.494;
> * test_client:All save set: path=/, level=full, diskno=1,
> max_sessions=3, stype=save,\
> * test_client:All path=/var, level=full, diskno=1,
> max_sessions=3, stype=save,\
> * test_client:All path=/u01, level=full, diskno=1,
> max_sessions=3, stype=save,\
> * test_client:All path=/devices, level=full, diskno=0,
> max_sessions=1, stype=save,\
> * test_client:All path=/system/contract, level=full,
> diskno=2, max_sessions=6, stype=save,\
> * test_client:All path=/system/object, level=full, diskno=2,
> max_sessions=6, stype=save ;
> * test_client:All parallelism: 8
> * test_client:All savefs test_client: succeeded.
> test_client: /system/object level=incr, 0 KB
> 00:06:59 0 files
> test_client: /system/contract level=incr, 0 KB
> 00:07:04 0 files
> test_client: /devices level=incr, 0 KB
> 00:08:12 0 files
> test_client: /u01 level=incr, 3 KB
> 00:08:18 6 files
> test_client: /var level=incr, 154 KB
> 00:09:29 9 files
> test_client: / level=incr, 17 KB
> 00:09:54 21 files
> rit010n20: index:test_client level=9, 38 KB
> 00:01:10 10 files
>
> To sign off this list, send email to
> listserv AT listserv.temple DOT edu and type "signoff networker" in
> the body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any
> problems with this list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html or via RSS
> at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>
>
>
> "Queensland celebrates its 150th anniversary in 2009. Check
> out what's on today at www.q150.qld.gov.au."
>
> ********************************* DISCLAIMER
> *********************************
> The information contained in the above e-mail message or
> messages (which includes any attachments) is confidential and
> may be legally privileged.
> It is intended only for the use of the person or entity to
> which it is addressed. If you are not the addressee any form
> of disclosure, copying, modification, distribution or any
> action taken or omitted in reliance on the information is
> unauthorised. Opinions contained in the
> message(s) do not necessarily reflect the opinions of the
> Queensland Government and its authorities. If you received
> this communication in error, please notify the sender
> immediately and delete it from your computer system network.
>
> To sign off this list, send email to
> listserv AT listserv.temple DOT edu and type "signoff networker" in
> the body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any
> problems with this list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html or via RSS
> at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
