Re: [Networker] tape drive : service mode
2008-12-17 14:08:26
And You do have to have Diagnostic Mode enabled under View to see
that...
Mine is set to 20 for each drive.
> -----Original Message-----
> From: EMC NetWorker discussion
> [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On Behalf Of Francis Swasey
> Sent: Wednesday, December 17, 2008 2:03 PM
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: Re: [Networker] tape drive : service mode
>
> On 12/17/08 1:55 PM, psoni wrote:
> > I got this message in the logs.
> >
> > Tape0 is automatically disabled. Consecutive errors
> exceeded the max. errors allowed.
> >
> > I chekced devics's properties to change this setting but
> didn't find anything.
> >
> > How do i change this attribute in NMC ?
> >
> >
>
> I see the parameter (Max consecutive errors:) in the advanced
> tab of the tape drive properties window in 7.4sp3.
>
> --
> Frank Swasey | http://www.uvm.edu/~fcs
> Sr Systems Administrator | Always remember: You are UNIQUE,
> University of Vermont | just like everyone else.
> "I am not young enough to know everything." - Oscar Wilde
> (1854-1900)
>
> To sign off this list, send email to
> listserv AT listserv.temple DOT edu and type "signoff networker" in
> the body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any
> problems with this list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html or via RSS
> at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|