The mminfo command seems to be very powerful. But it tends to give too much 
information.

I want to run the mminfo command just to give me this output regarding the 
client I ask about:

Last day backup, success or failure
What is the failure
How much data backed up

Is it possible to format mminfo only to give this information?

It would be interesting to know how networker administrators are using mminfo 
to monitor their backups.



-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On 
Behalf Of Fazil Saiyed
Sent: 10. nóvember 2008 16:21
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] mminfo command

Hello,
Does your clone use different pool then backups ? if so you can devise the 
mminfo query specifically checking completion & info on the pool in 
question, you can also, use networkers built in reporting for some of this 
information.
You may be able to substitute some of the cmd items to specifically focus 
on cloning aspect of the client, i.e, copies, ssid, clflags, pools etc.I 
am sure there are many more ways to do the same and other list 
participants can illustrate that.
HTH




kurianv <networker-forum AT BACKUPCENTRAL DOT COM> 
Sent by: EMC NetWorker discussion <NETWORKER AT LISTSERV.TEMPLE DOT EDU>
11/09/2008 10:40 PM
Please respond to
NETWORKER AT LISTSERV.TEMPLE DOT EDU


To
NETWORKER AT LISTSERV.TEMPLE DOT EDU
cc

Subject
mminfo command






Hi,
thanx very much for the reply....I hav a problem actually..iam using the 
below command for listing the contents of the tape
mminfo -a -r 
"volume(12),client(35),savetime,savesets(5),sumsize(15),totalsize(15),level,name(30)"

But for suppose when iam doing full backups and if the automatic clone 
fails in between for some clients during an unexpected failure and when i 
manually clone the tapes , i still cannot get information for the clients 
for which the automatic clone failed by using the same command. But in 
volume info i can see the information thru networker. Why is this 
happening? Is there anyway to check the information ?

Rgds.
k

+----------------------------------------------------------------------
|This was sent by kurianji AT gmail DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type 
"signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER



To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER