[Networker] Tape Drive errors while backing up
2008-11-02 03:05:24
Hi,
Please can you suggest for the problem mentioned stated below .
We are backing up using single HP sdlt tape drive for a storage node located
far away with out backup server. Sometimes we get a successful backup and
sumtimes not.I am getting errors ike Media Verification Failure. We are also
getting other types of random errors while initiating backups, or mounting
tapes like given below :
I)
Nov 01 12:35:14 sqasmbkp: NetWorker media: (warning) rd=qa-hal-dat01:\\.\Tape1
moving: tape_bsf bsf failed: drive status is Unit Attention, Device Internal
Reset
Nov 01 12:35:15 sqasmbkp: NetWorker media: (warning) rd=qa-hal-dat01:\\.\Tape1
moving: tape_rewind rewind failed: drive status is Hardware Error, BNCHMARK:
Diagnostic/POST failure - POST soft failure
Nov 01 12:35:15 sqasmbkp: QUANTUM : Diagnostic/POST failure - POST soft failure
Nov 01 12:35:15 sqasmbkp: SEAGATE : Diagnostic failed counter/timer test
Nov 01 12:35:15 sqasmbkp: NetWorker media: (warning) rd=qa-hal-dat01:\\.\Tape1
reading: tape_rewind rewind failed: drive status is Hardware Error, BNCHMARK:
Diagnostic/POST failure - POST soft failure
Nov 01 12:35:15 sqasmbkp: QUANTUM : Diagnostic/POST failure - POST soft failure
Nov 01 12:35:15 sqasmbkp: SEAGATE : Diagnostic failed counter/timer test
Nov 01 12:36:55 sqasmbkp: NetWorker media: (warning) rd=qa-hal-dat01:\\.\Tape1
reading: read open error: drive status is Drive reports no error - but state is
unknown
Nov 01 12:37:50 sqasmbkp: NetWorker media: (warning) rd=qa-hal-dat01:\\.\Tape1
reading: read open error: drive status is Drive reports no error - but state is
unknown
Nov 01 12:38:36 sqasmbkp: NetWorker media: (warning) rd=qa-hal-dat01:\\.\Tape1
moving: tape_bsf bsf failed: drive status is The tape drive is ready for use
II)
Nov 02 08:59:19 sqasmbkp: attribute in the device resource.
Nov 02 09:02:44 sqasmbkp: NetWorker media: (warning) rd=qa-hal-dat01:\\.\Tape1
moving: tape_bsf bsf failed: drive status is The tape drive is ready for use
Nov 02 09:02:44 sqasmbkp: NetWorker media: (warning) rd=qa-hal-dat01:\\.\Tape1
moving: tape_rewind rewind failed: drive status is The tape drive is ready for
use
Nov 02 09:02:44 sqasmbkp: NetWorker media: (warning) rd=qa-hal-dat01:\\.\Tape1
reading: tape_rewind rewind failed: drive status is The tape drive is ready for
use
Nov 02 09:05:11 sqasmbkp: NetWorker media: (warning) rd=qa-hal-dat01:\\.\Tape1
moving: tape_bsf bsf failed: drive status is The tape drive is ready for use
Our version is Nettworker 7.2 on windows
Please can you help ?
rgds,
k
+----------------------------------------------------------------------
|This was sent by kurianji AT gmail DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Networker] Tape Drive errors while backing up,
kurianv <=
|
|
|