Re: [Networker] HP LTO3 Drives with Linux RHEL4 Storagenode
2008-10-20 05:33:57
Vlad_K wrote:
NeilD wrote:
Have you checked CDI is switched off in Neworker for the drives?
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
Thank you, NeilD, for CDI
I have disabled it . And it seems like one drive works properly.
But there is another question...
Now i have following
[email protected]:HP Ultrium 3-SCSI M63S|Tape, /dev/sg0
S/N: HU10810A9F
ATPN:HP Ultrium 3-SCSI
HU10810A9F
WWNN:50060B0000630122
WWPN:50060B0000630120
PORT:00000001
[email protected]:HP Ultrium 3-SCSI M63S|Tape, /dev/nst1
S/N: HU1080639T
ATPN:HP Ultrium 3-SCSI
HU1080639T
WWNN:50060B00006301AE
WWPN:50060B00006301AC
PORT:00000001
Second one - /dev/nst1 works fine.
But /dev/sg0 doesn't work.
What should i do to determine drive path(link) for the system ?
There should be some conf file as i guess...
sg0 is SCSI Generic and is not the correct type of device for a tape
drive. You should be using nst? devices. I am not sure why this is being
picked up by inquire with an sg0 device but my hunch would be to look
and see whether there is an nst0 device, if so try using that.
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the body of the email. Please write to networker-request
AT listserv.temple DOT edu if you have any problems with this list. You can access the
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|