[Networker] Changing Blocksize - LTO4 Drives, Networker 7.4, Solaris 9
2008-08-08 18:49:06
I'm running Networker 7.4 on a Sun/Sparc Solaris 9 server, with a SpectraLogic
T50 jukebox, two LTO4 drives.
I want to verify what blocksize Networker is actually writing to the drives - I
believe it's 64kb. These drives are much more efficient at 512kb.
I manually set the drives to 512kb, but (admittedly only one try) they couldn't
read a previously written to tape.
If I want to change to 512kb blocksize, will I have to relabel all the tapes?
Also, I believe I read somewhere that Networker always writes the labels at
64kb and the backup data at something else.
Just beginning this investigation, and am looking to skirt red herrings.
Thanks.
+----------------------------------------------------------------------
|This was sent by lauradel AT cs.uoregon DOT edu via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
- [Networker] Changing Blocksize - LTO4 Drives, Networker 7.4, Solaris 9,
lauradel <=
|
|
|