Re: [Networker] Running mmrecov

Tim,

I was able to resolve my issue, the problem was created by me.  We have
an external encryption hardware in place, so my test environment was not
setup with the encryption hardware to decrypt the tapes when I attempted
the mmrecov.  Just had to zone everything together and all went well
after that.

Thanks 
Dameon Stevenson


-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Tim Mooney
Sent: Wednesday, June 25, 2008 3:16 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Running mmrecov

In regard to: [Networker] Running mmrecov, Dameon Stevenson said (at...:

> 39078:mmrecov: RAP error: Tape label read for volume ? in pool ?, is 
> not recognised by Networker: There is not enough memory available now.
>
> 36566:mmrecov:
> Cannot Mount volume on /dev/rmt2.1
> uasm exited with error 1

Was the tape device on your original NetWorker box set to variable block
size, and your current tape device is not?

It's been several years since I've had to sysadmin an AIX box, but I do
recall that one had to use a command to change the block size to tape
devices to 0 to make them variable.  I don't recall the command, maybe
chdev or chblock.  smit/smitty would know for certain.

Tim
-- 
Tim Mooney                                        Tim.Mooney AT ndsu DOT edu
Information Technology Services                   (701) 231-1076 (Voice)
Room 242-J6, IACC Building                        (701) 231-8541 (Fax)
North Dakota State University, Fargo, ND 58105-5164

To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER