Re: [Networker] Script for Read Only
2008-06-09 21:16:35
Different tape media, went from sdlt 320 to LTO-3. I thought the library
would ask to load one of the sdlt tapes. But I am doing a test backup
right now and its loading one of the LTO's.
Never mind
Alan Skinner
VTC Administrator
Systems Administrator
RAM, Inc.
Fort Dix, NJ
Office: 609-562-6039
BB: 609-439-5823
alan.skinner AT us.army DOT mil
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Fazil Saiyed
Sent: Monday, June 09, 2008 3:29 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Script for Read Only
Hello,
Question for you, is your new Tape Lib uses same type of Tape media, if
not, sure if you need to worry about marking tapes as read only.
If you really have to do it try.
There are different ways to get this done, here is one,you can produce a
list of tape first then pipe it to nsrmm and mark them read only.
HTH
Alan Skinner <alan.skinner AT US.ARMY DOT MIL>
Sent by: EMC NetWorker discussion <NETWORKER AT LISTSERV.TEMPLE DOT EDU>
06/09/2008 01:43 PM
Please respond to
EMC NetWorker discussion <NETWORKER AT LISTSERV.TEMPLE DOT EDU>; Please respond
to
Alan Skinner <alan.skinner AT US.ARMY DOT MIL>
To
NETWORKER AT LISTSERV.TEMPLE DOT EDU
cc
Subject
[Networker] Script for Read Only
Windows Server 2003 Environment
Networker 7.2.1
I have moved over to a new library. Need to mark old tapes as read only
with a script. Labeled by Bar Codes. I have over 200. Be very detailed,
don't use scripts that often. I am a windows guy, love those GUI's.
Thanks
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|