Hmm, at least sjisn sees the tapedrive

Serial Number data for 1.5.1 (QUANTUM  UHDL            ):
        Library:
                Serial Number: xxxxxxxxx
                SCSI-3 Device Identifiers:
                        ATNN=QUANTUM UHDL            xxxxxxxxx
                        IENN=00E09EFFFF086AE9
                        WWNN=500E09EFFF086AE9
        Drive at element address 32:
                SCSI-3 Device Identifiers:
                        VENN=xxxxxxxx

The serial numbers match my records.

Nico

On Tue, 2008-03-11 at 17:48 +0200, Catalin Scarlet wrote:
> Hi,
> 
> I had almost the same issue with solaris and inquire. Try to remove all 
> records regarding tapes, reboot it and try again inquire.
> Try sjisn 1.5.1 too..
> 
> Regards,
> 
> Catalin Scarlet
> Senior Technical Engineer
> 
> -----Original Message-----
> From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] 
> On Behalf Of Michael Nored
> Sent: 11 martie 2008 15:00
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: Re: [Networker] Adding a Superloader3
> 
> Since inquire did not come back with any drives it would seem that the OS is
> not seeing the tape drives, do you have any entries in the /dev/rmt dir?
> 
> Michael Nored

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER