Hi,

Thanks for the reply.
This is a better way of managing the tapes.

Regards
Navin

-----Original Message-----
From: Stan Horwitz [mailto:stan AT temple DOT edu]
Sent: 05 March 2008 13:06
To: EMC NetWorker discussion; Navin Ramcharitan
Subject: Re: [Networker] Networker not displaying tapes imported by library web 
interface


On Mar 5, 2008, at 3:24 AM, Navin Ramcharitan wrote:

> Hi All,
> Here's the setup:
> I have 2 tape libraries exactly the same make, model and config.
> Both are
> accessible by the Web interface. we normally import tape via the Web
> interface.

Use NetWorker to import the tapes; not the library's web interface. Do
this either by using nsrjb -d on the command line or via the NetWorker
Console Manager's library GUI.
**************************************************************************************
The email legal notice that governs the transmission of this electronic 
communication 
is available at http://www.mrpricegroup.com/legalnotice.htm Should you not have 
access 
to the internet please telephone +27 (0)31 310 8401 to request a copy.

Mr Price Group Ltd
**************************************************************************************

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER