Networker

Re: [Networker] Tape drive says "monitoring"?

2008-02-25 15:41:35
Subject: Re: [Networker] Tape drive says "monitoring"?
From: "Cox, Shawn" <Shawn.Cox AT PCCA DOT COM>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Mon, 25 Feb 2008 14:38:23 -0600
It's not an error per se.  It's just that for some reason manually working with 
media via the device when Auto Media Management is on gives this message.  I 
seem to recall that I can work with the device by giving it a longer period of 
time(like 90-120 seconds) between issued commands when AMM is on.  But in my 
case I pre label tapes for certain backups and so in order to speed up the 
process I temporarily disable AMM.  It's a little disheartening to hear that 
this issue is still present in v7.4 though...

--S

________________________________
From: Fazil.Saiyed AT anixter DOT com [mailto:Fazil.Saiyed AT anixter DOT com]
Sent: Monday, February 25, 2008 2:22 PM
To: EMC NetWorker discussion; Cox, Shawn
Cc: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Tape drive says "monitoring"?


Hello,
You should investigate the error, setting auto media off, could jeopardize your 
 backup routine , i do not recall having to do this intervention for 
reading\writing\scanning a tape.
HTH


"Cox, Shawn" <Shawn.Cox AT PCCA DOT COM>
Sent by: EMC NetWorker discussion <NETWORKER AT LISTSERV.TEMPLE DOT EDU>

02/25/2008 01:02 PM
Please respond to
EMC NetWorker discussion <NETWORKER AT LISTSERV.TEMPLE DOT EDU>; Please respond 
to
"Cox, Shawn" <Shawn.Cox AT PCCA DOT COM>


To
NETWORKER AT LISTSERV.TEMPLE DOT EDU
cc
Subject
Re: [Networker] Tape drive says "monitoring"?





I get that message when attempting to work with tapes when the device has "Auto 
Media Management" set to Yes.  I set it to No temporarily, do what I need to do 
and then set it back.
--Shawn

-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On 
Behalf Of MIchael Leone
Sent: Monday, February 25, 2008 12:45 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] Tape drive says "monitoring"?

I have a Win2003 server, running NW 7.4 SP1, with a single LTO-4 tape drive. NW 
is showing the drive as "monitoring". My backup job won't run, claiming that I 
need to label a different tape (I got the dread "too many open files in 
system", for which no one has ever seemed to find an answer for). Problem is, I 
can't seem to re-label the current tape, as it says that it is "monitoring", 
whatever that means. And I have no other spares at that site, since the order 
for more tapes doesn't come in until later this week.


--
Michael Leone
Network Administrator, ISM
Philadelphia Housing Authority
2500 Jackson St
Philadelphia, PA 19145
Tel:  215-684-4180
Cell: 215-252-0143
<mailto:michael.leone AT pha.phila DOT gov>

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or via RSS at 
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER



To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER