Officially,
- from compatibility guide dating of 1999-01-28,
you could run 5.5.0 (Kit Q1-1999)
- from compatibility guide dating of 2001-02-27,
you could run 6.0.1 (Kit Q1-2001)
but ...
as 6.0.1 supports Tru64 Unix 40D-> 40G and
as Tru64 Unix 40F->40G is supported by 6.1.4,
as normal saves are just reading UFS/AdvFS,
is should be ok to use 6.1.4 with 40D.
HTH
Th
Kind regards - Bien cordialement - Vriendelijke groeten,
Thierry FAIDHERBE
HP Services - Storage Division
Tru64 Unix and Legato Enterprise Backup Solutions Consultant
********* ********* HEWLETT - PACKARD SPRL/BVBA
******* h ******* Hermeslaan, 1a
****** h ****** B-1831 Diegem
***** hhhh pppp ***** BELGIUM
***** h h p p *****
***** h h pppp ***** Phone : +32 (0)2 / 729.85.42
****** p ****** Mobile : +32 (0)498/ 94.60.85
******* p ******* Fax : +32 (0)2 / 290.15.49
********* ********* Email/MSN : thierry.faidherbe(at)hp.com
Internet : http://www.hp.com/
I N V E N T
Enterprise number 0402.220.594 RPM/RPR Brussels
Winners don't do different things, ... they do just things differently!
-----Original Message-----
From: Anderson, Howard [mailto:Howard.Anderson AT edl.uk.eds DOT com]
Sent: vendredi 18 janvier 2008 16:45
To: EMC NetWorker discussion; Faidherbe, Thierry
Subject: RE: [Networker] Tru64 4.0 build 878 alpha
Thierry & Eddie & Tim,
Thierry That's a useful list of OS releases, many thanks, I have taken a
copy. I have systems still running 4.0G, but 4.0D is a little too old
even for me :-)
I have 6.1.4 running fine on 4.0G (On a TruCluster 1.6 but it needed
tweaking for the cluster install to work.) but on 4.0D I think we were
last running 6.1.1 (and started on 5.5). I would have thought 6.1.4
would be Ok. Looking through my media packs, 6.0.1 is definitely Ok for
4.0D as it is on the Legato printed compatibility list, but I would try
to use a newer version if I were you.
I have a copy of 6.1.4 on CD, but I would suggest you ask EMC very
nicely via PowerLink, and see if they will upload a copy into their FTP
server.
Regards,
Howard Anderson.
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Faidherbe, Thierry
Sent: 18 January 2008 09:20
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Tru64 4.0 build 878 alpha
Is it Digital Unix / Compaq Tru64 Unix V 4.0D.
V4.0 Rev. 386
V4.0A Rev. 464
V4.0B Rev. 564
V4.0C Rev. 564.32
V4.0D Rev. 878
V4.0E Rev. 1091
V4.0F Rev. 1229
V4.0G Rev. 1530
V5.0 Rev. 910
V5.0A Rev. 1094
V5.1 Rev. 732
Warm regards,
Th
Kind regards - Bien cordialement - Vriendelijke groeten,
Thierry FAIDHERBE
HP Services - Storage Division
Tru64 Unix and Legato Enterprise Backup Solutions Consultant
********* ********* HEWLETT - PACKARD SPRL/BVBA
******* h ******* Hermeslaan, 1a
****** h ****** B-1831 Diegem
***** hhhh pppp ***** BELGIUM
***** h h p p *****
***** h h pppp ***** Phone : +32 (0)2 / 729.85.42
****** p ****** Mobile : +32 (0)498/ 94.60.85
******* p ******* Fax : +32 (0)2 / 290.15.49
********* ********* Email/MSN : thierry.faidherbe(at)hp.com
Internet : http://www.hp.com/
I N V E N T
Enterprise number 0402.220.594 RPM/RPR Brussels
Winners don't do different things, ... they do just things differently!
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Tim Mooney
Sent: jeudi 17 janvier 2008 22:02
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Tru64 4.0 build 878 alpha
In regard to: [Networker] Tru64 4.0 build 878 alpha, Willett, Jr.,
Edward...:
> Anyone know what the last client to support Tru 64 4.0 build 878 alpha
> was and where I can download it from?
I don't remember what build 878 corresponds to -- is that 4.0f? It
seems like it's something earlier, like 4.0d...
In any case, it was likely something in the 6.1.x series. I know I ran
a 6.1.x client on my Tru64 workstation when it was running 4.0f.
I'm sure we still have a 6.1.x client for Tru64 on a CD somewhere, but I
don't think it would be legal for me to provide it to you, so your best
bet is to hunt around on ftp.legato.com.
Tim
--
Tim Mooney Tim.Mooney AT ndsu DOT edu
Information Technology Services (701) 231-1076 (Voice)
Room 242-J6, IACC Building (701) 231-8541 (Fax)
North Dakota State University, Fargo, ND 58105-5164
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
