|
Re: [Networker] nsrclone says busy
2007-12-04 15:00:51
Fazil,
we use Networker 7.3.2.
Pools and devices are good, because sometimes it works for 2 weeks
without any problem. Debugging gives nothing extra, just busy (-vvvv to
nsrclone). The scripts that clone make sure the saveset is valid
(!incomplete) and I checked the savesets flags and clone flags with
mminfo.
Fazil Saiyed schreef:
In my experience cloning requires significant effort to configure and
troubleshoot, i would check the pools and device restrictions and make
sure enough resources are available for cloning, turn on debugging also.
Make sure the ssid you are trying to clone is valid , i.e not a suspect or
incomplete.
You did not mention the Networker version and your configurations ?
Thanks
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the body of the email. Please write to networker-request
AT listserv.temple DOT edu if you have any problems with this list. You can access the
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the body of the email. Please write to networker-request
AT listserv.temple DOT edu if you have any problems with this list. You can access the
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|
