Re: [Networker] nsrjb when drives are connected to ndmp host
2007-10-16 08:36:27
You do not mention what kind of nas device you have your drives hooked
up too.
Check on your nas to make sure the drives are seen.
Netapp run storage show tape and sysconfig -t will show you the drive
address to use to configure in networker.
The mount command should be something like nsrjb -lvv -f
ndmphostname:deviceadd gleemed from the sysconfig -t output.
EDWARD COTY
LEAD STORAGE ENGINEER, LCNA, NACP
WORK - 973-533-2098
CELL - 973-296-0918
EDWARD.COTY AT AIG DOT COM
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Vernon Harris
Sent: Monday, October 15, 2007 11:32 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] nsrjb when drives are connected to ndmp host
I need to verify drive ordering and I'm having difficulty using nsrjb to
mount and unload a tape in each drive. Does anyone know the correct
syntax.
The library is connected to the networker server and the drives are
connected to the ndmp host. Have used the following command with no
luck.
nsrjb -l -f c4 000008L3
nsrjb: error, Cannot find any jukebox with a device named `c4'.
# nsrjb -l -f ndmphostname:/dev/rmt/64 000008L3
nsrjb: error, Cannot find any jukebox with a device named
`ndmphostname:/dev/rmt/64'.
# nsrjb -l -f rd=ndmphostname:/dev/rmt/64 000008L3
nsrjb: error, Cannot find any jukebox with a device named
`rd=ndmphostname:/dev/rmt/64'.
# nsrjb -l -f /dev/rmt/64 000008L3
Please help
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|