Dave,
Hmmm...
Is this a brand new set up with brand new tapes? One time we got a
batch of bad tapes but that's unlikely. I've never had problems with
block size so I don't know about that.
I see both tapes errored at the same time so it doesn't seem the drives
would be the problem. A reset on the SCSI bus can cause tapes to be
marked full prematurely so you might want to look into that. In general
I'd recommend that your tape library shouldn't share the SCSI bus with
other devices if possible.
Dave
David Werth
Garmin AT, Inc
Salem, Oregon
dave.werth<at>garmin.com
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Dave Martini 1
Sent: Thursday, October 04, 2007 2:11 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] Tapes marked full prematurely
Once again it prematurely marked my tapes full. One at 27 gigs and the
other at 30 gigs.
Why is it giving this error?????
Block size is 32768 bytes not 131072 bytes.
Here are the errors in the log exactly when it happened.
The first 2 lines show I/O errors
10/03/07 21:37:25 nsrd: media warning: /dev/rmt/1cbn writing: I/O error,
at file 23 record 15550
10/03/07 21:37:25 nsrd: media warning: /dev/rmt/0cbn writing: I/O error,
at file 18 record 11805
And then it marks both tapes full
10/03/07 21:37:25 nsrd: media notice: 8mm AIT-5 tape 000001 on
/dev/rmt/1cbn is full
10/03/07 21:37:25 nsrd: media notice: 8mm AIT-5 tape 000002 on
/dev/rmt/0cbn is full
10/03/07 21:37:25 nsrd: media notice: 8mm AIT-5 tape 000001 used 27 GB
of 400 GB capacity
10/03/07 21:37:26 nsrd: media notice: 8mm AIT-5 tape 000002 used 30 GB
of 400 GB capacity
10/03/07 21:37:38 nsrd: media notice: Volume "000001" on device
"/dev/rmt/1cbn": Block size is 32768 bytes not 131072 bytes. Verify the
device configuration. Tape positioning by record is disabled.
10/03/07 21:37:48 nsrd: media notice: Volume "000002" on device
"/dev/rmt/0cbn": Block size is 32768 bytes not 131072 bytes. Verify the
device configuration. Tape positioning by record is disabled.
10/03/07 21:37:57 nsrd: media warning: Jukebox `[email protected]' Hardware
status of jukebox '[email protected]' changed from 'ready' to 'cann
ot access the hardware'
10/03/07 21:38:24 nsrd: media warning: Jukebox `[email protected]' Hardware
status of jukebox '[email protected]' changed from 'cannot access t
he hardware' to 'detected hardware change'
10/03/07 21:38:26 nsrmmgd: Resynchronizing jukebox `[email protected]' with
nsrlcpd.
10/03/07 21:38:46 nsrd: media warning: /dev/rmt/0cbn reading: fsr 11799
read: I/O error
10/03/07 21:38:46 nsrd: media emergency: could not position 000002 to
file 18, record 11801
10/03/07 21:38:59 nsrd: media info: Jukebox `[email protected]' Hardware
status of jukebox '[email protected]' changed from 'detected hardware
change' to 'ready'
10/03/07 21:39:56 nsrd: media warning: /dev/rmt/0cbn reading: fsr 11799
read: I/O error
10/03/07 21:39:56 nsrd: media emergency: could not position 000002 to
file 18, record 11801
10/03/07 21:41:09 nsrd: media warning: /dev/rmt/0cbn reading: fsr 11799
read: I/O error
10/03/07 21:41:09 nsrd: media emergency: could not position 000002 to
file 18, record 11801
10/03/07 21:41:09 nsrd: media warning: /dev/rmt/0cbn moving: fsf 18: I/O
error
10/03/07 21:42:23 nsrd: media warning: /dev/rmt/0cbn reading: fsr 11799
read: I/O error
10/03/07 21:42:23 nsrd: media emergency: could not position 000002 to
file 18, record 11801
10/03/07 21:42:23 nsrd: media warning: verification of volume "000002",
volid 274782 failed, can not read record 11801 of file 18 on 8m
m AIT-5 tape 000002
Thanks.
Dave Martini
LLNL
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
-------------------------
This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient. If you are not the intended recipient, please
be aware that any disclosure, copying, distribution or use of this e-mail or
any attachment is prohibited. If you have received this e-mail in error,
please contact the sender and delete all copies.
Thank you for your cooperation
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|