Re: [Networker] tape block size
2007-09-24 09:59:26
to answer my own question for the list:
1. In the server's NetWorker Administration interface, click Devices.
2. Select View > Diagnostic Mode on the menu bar.
3. Open the Libraries folder in the navigation tree and select the drive
that contains the mounted volume with the block size being checked. The
drive's details table appears.
4. Right-click the drive in the details table, and select Properties.
The Properties window appears.
5. Select the Advanced tab. In the Device Configuration area, the
currently configured Device Block Size value is displayed. (or 'handler
default')
6. Select the appropriate Device Block Size value.
7. Click OK.
ta
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Landwehr, Jerome
Sent: Monday, September 24, 2007 9:41 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] tape block size
specifically, how can I change it for NDMP devices?
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Terry Lemons
Sent: Monday, September 24, 2007 9:35 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] tape block size
Hi Jerome
You'll find this documented in the NetWorker Administration Guide, in
the section, "Compatible block size for UNIX and Microsoft Windows".
tl
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Landwehr, Jerome
Sent: Monday, September 24, 2007 9:29 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] tape block size
Do you guys know where to change the tape block size that NetWorker
uses?
Is it set at the OS level of whoever is labelling the tape?
TIA
Jerry
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|