[Networker] Backup speed drop with 7.3.3 (nsmmd problem?)
2007-09-01 16:47:12
[Argh...I spent gathering info and typing this message, and I think I
see the issue...more info at the bottom]
This is a new setup, and I'm at a loss as to what's happening -
wondering if someone else has seen something similar.
Server is a Dell 1850 running Red Hat ES4 (32-bit) and Networker 7.3.3
with a PERC-connected RAID 5 array for adv_file storage.
Backup client is an older Dell 1750 running Red Hat ES4 (32-bit) with an
Adaptec ASR-2130S-connected RAID 5 set with a filesystem containing
400GB of Oracle dump files. Only the dumps are being backed up. Client
is 7.3.3.
Connection is via a private backup network, with a single gbit switch in
between. Both hosts have their adapters at 1000/full, and are not
showing any errors (I don't have insight to the switch yet - it's
managed by the people I'm setting up the backup for, and its the long
weekend).
Things start off at a steady rate of 35MB/s, with perhaps peaks in the
40MB/s range. Reasonable enough.
But at someone point - roughly an hour or about 140-150GB in to the
backup, speeds suddenly drop to a VERY steady 146 +- 2KB/s. And with
250GB to go, VERY unacceptable.
Any thoughts as to what might be the cause of this degradation?
New: Now I'm noticing that on the backup server that one of the nsrmmd
processes is eating up CPU...is this the problem on 7.3.3 that I've been
hearing about? Is the only solution to downgrade to 7.3.2?
-Brian
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the body of the email. Please write to networker-request
AT listserv.temple DOT edu if you have any problems with this list. You can access the
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Networker] Backup speed drop with 7.3.3 (nsmmd problem?),
Brian O'Neill <=
|
|
|