To back up exchange via the module you need to customise the client
record a bit.
In the client record for that host change the savesets from All to
MSEXCH:IS and the 'Backup Command' from blank to 'nsrxchsv'
You will note that this only backs up the data in exchange - if you want
to also backup the file systems you will need a second client record for
this host set up as usual to do that - this has to be run by a separate
group to the other client record - usually we have a special group just
for exchange backups to do this.
When the backup runs correctly you get a very different set of messages
in the savegroup report - eg:
ntxxx:MSEXCH:IS [7372] [I] 06/27/07 22:00:06 nsrxchsv_ese.exe Version:
4.1.0.148 Supporting Exchange 2000 and Exchange 2003
ntxxx:MSEXCH:IS [7372] [I] 06/27/07 22:00:06 System Version: 5.2 Build
3790 Service Pack 1
ntxxx:MSEXCH:IS [7372] [I] 06/27/07 22:00:06 ESEBCLI2.DLL Version:
6.5.7638.1 Service Pack 2
ntxxx:MSEXCH:IS [7372] [I] 06/27/07 22:00:06 Performing an Exchange save
operation; save level is Full (Legato Backup Level: full).
ntxxx:MSEXCH:IS [7372] [I] 06/27/07 22:00:06 Parsing parameters from the
command line...
ntxxx:MSEXCH:IS [7372] [I] 06/27/07 22:00:06 Opening connection to
NetWorker Server...
ntxxx:MSEXCH:IS [7372] [I] 06/27/07 22:00:07 Processing storage group
"SG1"
ntxxx:MSEXCH:IS [7372] [I] 06/27/07 22:00:10 Backup storage group SG1 to
isdxx
ntxxx:MSEXCH:IS [7372] [I] 06/27/07 22:00:10 Backup database: SG1MB1
{E8FDD296-24BD-4C54-8C1E-4532FC156CE7}
ntxxx:MSEXCH:IS [7372] [I] 06/27/07 22:23:47 Backup of SG1MB1 was
successful
ntxxx:MSEXCH:IS [7372] [I] 06/27/07 22:23:47 Backup database: SG1PUB
{B4B63539-6B07-47C1-BE2E-575CF704635E}
ntxxx:MSEXCH:IS [7372] [I] 06/27/07 22:23:56 Backup of SG1PUB was
successful
ntxxx:MSEXCH:IS [7372] [I] 06/27/07 22:23:57 Backup of logs for storage
group SG1 was successful
ntxxx:MSEXCH:IS [7372] [I] 06/27/07 22:23:59 Completed backup of SG1
Status: 0x00000000
ntxxx:MSEXCH:IS The operation completed successfully.
ntxxx:MSEXCH:IS [7372] [I] 06/27/07 22:23:59 ntxxx: MSEXCH:IS 30 GB
00:23:52 7 file(s)
isdxx: index:ntxxx level=full, 144 MB 00:00:05 191 files
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Clark, Patti
Sent: Thursday, 28 June 2007 1:55 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] *NIX Admin backing up Windows platforms - gotchas?
and Exchange
Greetings -
I've been backing up *NIX systems for years, recently migrated the
server platform to RHEL4 and Networker v7.3.2, and have managed to
muddle along thanks in a huge part to the information obtained on this
list. Now I'm adding Windows clients for the first time and except for
being a superficial user, I am fairly ignorant on some of the jargon and
technical issues wrapped around the Windows platform. I have 5 Win
clients that have already been introduced into my backups and apparently
seem to be backing up correctly. I'd used my personal workstation as a
guinea pig and successfully performed a simple file restore. I have the
VSS client modules and I have Exchange modules sized for the platforms
and their complement of CPUs, installed and enabled. Today, I will be
adding an Exchange Server client to the fray. I've read the doco,
queried the Windows admin, and in anticipation, monitored the list for
any helpful info. Other than installing the client software and
configuring via nsradmin per normal, I don't see any additional
configuration areas that I need to do anything about, so, are there any
special gotchas for Win clients and/or Exchange in particular? It's
looking way to easy at this point and I feel like I'm missing something
important.
Patti Clark
Unix System Administrator - RHCT
Office of Scientific and Technical Information
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
NOTICE
This e-mail and any attachments are confidential and may contain copyright
material of Macquarie Bank or third parties. If you are not the intended
recipient of this email you should not read, print, re-transmit, store or act
in reliance on this e-mail or any attachments, and should destroy all copies of
them. Macquarie Bank does not guarantee the integrity of any emails or any
attached files. The views or opinions expressed are the author's own and may
not reflect the views or opinions of Macquarie Bank.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|