Re: [Networker] LTO-3 Drives?
2006-11-02 05:46:14
Albert Eddie Contractor AFRPA CIO/IT wrote:
According to EMC only upto LTO-2. /ALE
-----Original Message-----
From: EMC NetWorker discussion
[mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On Behalf Of Thomas, Tim
Sent: Wednesday, November 01, 2006 5:12 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] LTO-3 Drives?
What?
So, what type of support is there in 7.2.2?
This is very strange statement for them to make since "LTO Ultrium-3" is
listed as on option in nwadmin on version 7.2.1.
It is also strange because we all know that NetWorker does not provide
drivers for any tape drive, this is left to the operating system. The
device type you define has no effect on the performance, reliability,
compression capabilities or anything else of your tape drives. You could
define your LTO 3 drives as QIC or VHS, or anything else, and they would
still work the same, at ANY version of NetWorker, even back to version
4.x and earlier.
Support for tape drives in NetWorker is purely cosmetic - it's just a name.
Support for tape LIBRARIES is a different kettle of seafood since
NetWorker does provide the drivers.
-----Original Message-----
From: EMC NetWorker discussion
[mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On Behalf Of Albert
Eddie Contractor AFRPA CIO/IT
Sent: Wednesday, November 01, 2006 4:10 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] LTO-3 Drives?
EMC Tech Support just told me that it is MANDATORY to upgrade
to 7.3.2 for LTO-3 (compression) drive support.
Hmmm.... /ALE
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|