You need to use the force flag with jbconfig to get around that
-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT listserv.temple DOT edu]
On Behalf Of Raghava Karu
Sent: Wednesday, 23 August 2006 9:22 AM
To: NETWORKER AT listserv.temple DOT edu
Subject: [Networker] unable to add device with jbedit
I have to add 5 new tape drives to the the existing jukebox resources(60
drives configured in DDS). I am unable to do it with jbedit (jbedit -a
-j "name" -p /dev/rmt/xcbn) , and getting following error.
" Jbedit: Your jukebox reports having 17 drives, while this change will
make it to 13 drives! Please check your hardware and retry this
operation.
Jbedit: error, Mismatch in jukebox drives!"
I tried through nwadmin gui as follow, but getting error "Incorrect
number of values in 'loaded volumes' should be 'X'. did I miss anything
or pl let me know if there is a work around without running jbconfig ..
Env : Solaris 9, Networker 7.2, DDS
Steps:
After creating 5 devices through nwadmin -> devices -create -apply
Run nwadmin, Media menu -> select Jukeboxes,-> View menu and select
Details Devices field added the entries for the desired devices
tried to add 5 blank lines in the Loaded Volumes, Loaded Barcode and
Loaded Slots fields but not allowing to configure..
Thanks
Raghava
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
NOTICE
This e-mail and any attachments are confidential and may contain copyright
material of Macquarie Bank or third parties. If you are not the intended
recipient of this email you should not read, print, re-transmit, store or act
in reliance on this e-mail or any attachments, and should destroy all copies of
them. Macquarie Bank does not guarantee the integrity of any emails or any
attached files. The views or opinions expressed are the author's own and may
not reflect the views or opinions of Macquarie Bank.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|