Re: [Networker] LTO2 file size setting?

Yep, I don't know if it is ULTRIUM for the LTO2 class, or ULTRIUM for
IBM LTO2 drives. /ALE

> -----Original Message-----
> From: Legato NetWorker discussion 
> [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On Behalf Of Davina Treiber
> Sent: Friday, June 30, 2006 11:11 AM
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: Re: [Networker] LTO2 file size setting?
> 
> Stuart Whitby wrote:
> > Hmm.  This was a new one on me, so I tried to find it in 
> strings output.  No joy - can't find anything under 7.1.3 in 
> /usr/sbin on Solaris which mentions ULTRIUM.  I did find 
> NSR_DEV_TAPE_FILE_SIZE_ and NSR_DEV_TAPE_FILE_SIZE_MSG, so my 
> *guess* is that if you purely have LTO2 in your environment, 
> you should just need to set this.  However, the string may 
> depend on the drive type in use, in which case it would 
> depend on how the drive type is named within NetWorker.  
> >  
> > Can anyone else confirm that it's LTO_ULTRIUM_2?
> 
> It will certainly be NSR_DEV_TAPE_FILE_SIZE_LTO_ULTRIUM_2. 
> The formula is that and spaces or dashes in the device type 
> are changed to underscores.
> 
> If you set NSR_DEV_TAPE_FILE_SIZE_MSG=YES and start nsrd, it 
> reports the file size for LTO-2 as 32768 blocks.
> 
> >  
> > Cheers,
> >  
> > Stuart.
> > 
> > ________________________________
> > 
> > From: Legato NetWorker discussion on behalf of Olaf Zaplinski
> > Sent: Fri 30-Jun-06 09:39
> > To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> > Subject: [Networker] LTO2 file size setting?
> > 
> > 
> > 
> > Hi,
> > 
> > I set the file size for LTO1 here using the 
> > NSR_DEV_TAPE_FILE_SIZE_LTO_ULTRIUM variable. What is the 
> name of this 
> > variable for our LTO2 drive? Is it 
> NSR_DEV_TAPE_FILE_SIZE_LTO_ULTRIUM_2 ?
> > 
> > Olaf
> > 
> 
> To sign off this list, send email to 
> listserv AT listserv.temple DOT edu and type "signoff networker" in 
> the body of the email. Please write to 
> networker-request AT listserv.temple DOT edu if you have any 
> problems wit this list. You can access the archives at 
> http://listserv.temple.edu/archives/networker.html or via RSS 
> at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
> 

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER