Networker

[Networker] Disk backup

2006-05-17 11:17:35
Subject: [Networker] Disk backup
From: Librado Pamintuan <LPamintuan AT REGINA DOT CA>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Wed, 17 May 2006 09:11:09 -0600
Good morning to all,
We recently acquired an DELL/EMC AX100i storage array with 12x 500GB SATA 
drives with 2 SPs (storage processors). Each SPs are directly connected to my 
Linux server using GB NICs.

First or initial config is 2x 1.3 TB virtual disks on RAID 5, the backup 
throughput is only 10 to 15 MB/s. In the hope of improving the backup speed, I 
re-created the virtual disks, this time I sacrificed capacity by using RAID 
1/0. Able to create 2x 1.3TB virtual disks using all the 12 disks.
The backup throughput improves a bit if I'm just using/writing on one of the 
virtual disk, but if I use them concurrently, the throughput slows down to 10 
to 15 MB/s again.
Don't now why, but somehow LTO-2 tape drives throughput (15 to 20 MB/s) is a 
lot faster than disks and also when I'm cloning the savesets on the disk to 
tapes, the throughput is on average of 5 MB/s to 10 MB/s only. The data is 
already on local disk and throughput should be a lot faster, but this is not 
case in here.

Environment: Dell PowerEdge 2850 server with 2x 3.8 GHz processor and 4GB RAM
O/S: Red Hat Linux ES 3 kernel 2.4.21-32.0.1.ELsmp
Networker server: v7.2.2

Any advise, suggestions or explanation is greatly appreciated.



Librado Pamintuan
Technical Support Analyst II
Information Systems Dep.
Operations Group
City of Regina

Phone:          (306) 777-7573
General Fax: (306) 777-6804
eFax:             (306) 546-6002
eMail:            lpamintuan AT regina DOT ca



<html><body><font face = "arial" size = "1">
DISCLAIMER: The information transmitted is intended only
for the addressee and may contain confidential,
proprietary and/or privileged material. Any
unauthorized review, distribution or other use
of or the taking of any action in reliance upon
this information is prohibited. If you received
this in error, please contact the sender and
delete or destroy this message and any copies.
</font><body></html>

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

<Prev in Thread] Current Thread [Next in Thread>