Re: [Networker] Auto media management...
2006-05-10 14:57:05
>
> Dear All,
> In my installation (NetWorker 6.1.3) i have the autochanger (STK9730)
> configured and i have configured Auto Media Management (AMM) = NO in juke
> box resource configuration. Its attached to backup server only. No Storage
> nodes, no DDs etc.
> .
> But in spite of this, I see NetWorker is automatically recycling the media
> as and when required.
That's what networker does. If you don't want it to do so, you'll have
to mark the volumes as manually recyclable.
> Have anybody seen this behavior and probable cause of this. My backups are
> going on absolutely fine.
The cause of this is that AMM has nothing to do with volume recycling.
It may be confusing, but the documentation is explicit. AMM only deals
with the automatic labeling of non-networker media. It does not affect
recycling of valid networker tapes.
auto media management (read-write)
This attribute indicates whether automated media
management for the jukebox is enabled. The value can
be yes or no. If the value is set to yes, then unla-
beled volumes in the jukebox may be automatically
labeled by NetWorker. NetWorker verifies that the
volume is unlabeled before labeling the volume. A
volume is considered to be unlabeled if the volume does
not contain a label that may be read by the device in
the jukebox into which the volume is loaded.
[...]
--
Darren Dunham ddunham AT taos DOT com
Senior Technical Consultant TAOS http://www.taos.com/
Got some Dr Pepper? San Francisco, CA bay area
< This line left intentionally blank to confuse you. >
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|