How do I get networker to recognize a cleaning tape?
What's the command?
And if I deposit the tape will it automatically send the tape to it's
assigned slot?
-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On Behalf Of Jeff Mery
Sent: Thursday, April 20, 2006 10:48 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Storage nodes/server sharing a tape library
First, our architecture is 100% FC with the exception of the library
robotics. Each backup server and storage node is zoned in the SAN to
see
only the drives that we want them to. The DDS drive is zoned to both of
the systems we want it to float between. This should work with SCSI
libraries as well as long as everything is close enough to the library
of
course.
After the zoning was completed and verified, everything was setup with
jbconfig. First on the NW server, then each storage node. We did the
DDS
drive last after testing each system/drive combination along the way.
The
verification was done to ensure what we thought was /dev/rmt/ubn1 really
was /dev/rmt/ubn1 and so on. It's been almost 2 years since we set it
up,
so I'm a bit fuzzy on the exact jbconfig process. I can dig up the
documentation or check with my co-worker if anyone would like additional
detail.
Jeff Mery - MCSE, MCP
National Instruments
------------------------------------------------------------------------
-
"Allow me to extol the virtues of the Net Fairy, and of all the
fantastic dorks that make the nice packets go from here to there. Amen."
TB - Penny Arcade
------------------------------------------------------------------------
-
Fazil Saiyed <fazil.saiyed AT ANIXTER DOT COM>
Sent by: Legato NetWorker discussion <NETWORKER AT LISTSERV.TEMPLE DOT EDU>
04/20/2006 07:40 AM Please respond to Legato NetWorker discussion
<NETWORKER AT LISTSERV.TEMPLE DOT EDU>; Please
respond to
Fazil Saiyed <fazil.saiyed AT ANIXTER DOT COM>
To
NETWORKER AT LISTSERV.TEMPLE DOT EDU
cc
Subject
Re: [Networker] Storage nodes/server sharing a tape library
Hello,
Can you explian how you set it up , via Jbconfig or otherwise ?
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type
"signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
***********************************************************************************
The information in this email (including any attachments) is confidential and
may be legally privileged. Access to this e-mail by anyone other than the
intended addressee is unauthorized. If you are not the intended recipient of
this message, any review, disclosure, copying, distribution, retention, or any
action taken or omitted to be taken in reliance on it (including any
attachments) is prohibited and may be unlawful. If you are not the intended
recipient, please reply to or forward a copy of this message to the sender and
delete the message, all attachments, and any copies thereof from your system
and destroy any printout thereof.
______________________________________________________________________
The information in this email (including any attachments) is confidential and
may be legally privileged. Access to this e-mail by anyone other than the
intended addressee is unauthorized. If you are not the intended recipient of
this message, any review, disclosure, copying, distribution, retention, or any
action taken or omitted to be taken in reliance on it (including any
attachments) is prohibited and may be unlawful. If you are not the intended
recipient, please reply to or forward a copy of this message to the sender and
delete the message, all attachments, and any copies thereof from your system
and destroy any printout thereof.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
