Re: [Networker] Zoning_Brocade_Adic i2K_Overlaping zones Not working
2006-03-31 12:26:48
Do you have the tape drivers installed?
-----Original Message-----
From: Legato NetWorker discussion on behalf of Fazil Saiyed
Sent: Fri 3/31/2006 8:27 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Cc:
Subject: [Networker] Zoning_Brocade_Adic i2K_Overlaping zones Not
working
Hello,
I am having lots of trouble with ADIC Tape lib working with Storage node
server and MS.
Our confgiguration is as below.
One Master server attached to Adic i2K lib zoned to Brocade 3800
swithes at
WWW level, tape robot is also assigned to the server host on this FA.
Storage node is also accessing the same tape lib zoned for two of the 8
drives on the lib to the same FA on Adic.
Even though the sn server sees the drive in DM and inquire cmd is
reporting
the drives to be there, do this date i have not been able to use MT or
native backup utility to werite to it.
In this senario i have overlaping zones to Adic lib, is Brocade zoning
correct, should i have zoned all hosts and lib in one zone vs two
seperate
zones? What do you think is hapening, why the lTO-2 drives are
inaccisble
from SN server even thoughh they seems to be right there.
Zone
MS+Adic+Brocade--Zone1
SN+ADIC ( two drives)+Brocade--Zone2
Should this be like below.
MS+ADIC+SN+Brocade in Zone1.
Any one with Brocade knowledge with zoning please help.
Thanks
|
|
|