Hello,
   I just added two LTO3 tape drives to our STK L700 which already had eight
LTO2 drives. I'm using Legato NW 7.2.1 on Windows2003 and I have a problem
where Legato is trying to mount the LTO3 tapes in the LTO2 drives. This is
causing delays in savegroups, and the LTO2 drives to go into service mode
because of too many errors.
   I have several dedicated storage nodes with which I am using SnapImage. I
want to dedicate the biggest ( 1.7 TB ) , most important, SnapImage savesets
to these two new LTO3 drives and LTO3 volumes. I would also like for the two
LTO3 drives to be available for other storage nodes and restores when not
busy with big SnapImage jobs.
   Any suggestions on how I configure NW so I can keep the LTO3 tapes
dedicated to the LTO3 drives? I appreciate any feedback or suggestions. Thanks. 

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER